|
[China]
Trade Verify
Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China
Contact name:Seline Yu
DONGGUAN YUYANG INSTRUMENT CO., LTD |
|
Verified Suppliers
|
|
|
± 2 ℃ Laptop / Touch Control Lithium Battery Pack Washing Testing Machine 6kw
Product description:
Lithium-ion battery stack washing up tester, battery lavation
tester is suitable for the following batteries or battery packs
1, hand-held electronic products with lithium-ion battery pack
2, may be placed in the pocket to carry or use of portable
electronic products with lithium-ion battery pack
3, other portable electronic products can be placed in the pocket
to carry the battery pack
4, the installation of non-user replacement type battery / battery
pack of hand-held electronic products such as washing test.
Test Method:
1.Solution: Preparing solution with PH at 11.0±0.1(Naoh solution
available mass fraction at 0.004%) and heat solution at (45±2)ºC.
2. Soaking: Fix the sample on the rotating device, and then place
the sample in the solution (the center of the battery is 300mm +
10mm) to soak 0.5H. The temperature of the solution keeping at (45
+ 2) ºC during the test.
3. Stiring: Fix the sample on the rotary device and rotat 0.5H in
the solution, rotating speed at 60r/min.
4. Dewatering:Remove the solution, rotate 10 min, and rotating
speed is 800r/min.
5. Drying: Put the samples in a high temperature box to heat 0.5H,
and the heating temperature was (45 + 2) ºC.
6. If the sample can continue to charge and discharge, then follow
the prescribed charge and discharge method to do a cycle of
discharge charging and end the test. If the sample can not continue
to charge and discharge, the test will be finished. During the
test, the sample should not fire and explode.
Technical parameter:
| Product name | Lithium-ion battery stack washing up tester, battery lavation tester |
| temperature range | room temperature ~ 80 ℃ (adjustable, can be arbitrarily set), the commonly used temperature of 45 ± 2 ℃ |
| temperature accuracy | ± 0.5 ℃ |
| temperature uniformity | ± 2 ℃ |
| stirring | the sample fixed to the rotating device (washing paddle) in the solution for 0.5h, speed 60r / min |
| inner box Material | SUS # 316 stainless steel |
| test time | 0-9999H / M / S can be arbitrarily set |
| temperature control methods | intelligent P.I.D control |
| control system | PLC man-machine interface, reliable performance, high modulus accuracy, set the parameters after the test automatically completed, simple and efficient |
| washing solution | configure the pH value of 11.0 ± 0.1 solution (can use the mass fraction of 0.004% NaOH solution), the washing solution by the customer self |
| soak | the sample fixed on the rotating device (washing paddle), and then placed the sample in the solution (the battery center distance from the surface height of 300mm ± 10mm) soak 0.5h, the test process to maintain the temperature of the solution (45 ± 2) ℃ |
| equipment outside size | 1000x1260x2200 mm (LxWxH) |
| Power supply | AC 380V, 50HZ, 16A (need to be equipped with independent air switch), |
| Power | 6KW |
Standard:
