|
[China]
Trade Verify
Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China
Contact name:Seline Yu
DONGGUAN YUYANG INSTRUMENT CO., LTD |
|
Verified Suppliers
|
|
|
< ± 0.5% Environmental High Low Temperature Tensile Tension
Testing Machine 400mm
Product Description:
This series of Tensile Tester is widely used in wires & cables,
hardware, metal, rubber, footwear, leather, apparel, fabric, tape
paper products, pharmacy and so on, for tensile strength, tear
resistance, peel strength, bend strength, shear force , ect with
different fixtures according to national and international
standards or customer required.
This Environmental High Low Temperature Tensile Tension Testing Machine
is a kind of electric tensile tester with temperature control
chamber, which uses the motor to drive ball screw to move fixture.
Place the fixture with sample between the upper and lower fixture
in temperature chamber, use a given speed to pull sample upward by
upper fixture. Load cell above upper fixture will sense tensile
strength, and convert the strength into voltage sign and output to
the display screen. And the strength value will be displayed
automatically.
Main Technical Parameters :
| Items | Specification |
| Capacity (optional) | 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000kg |
| Unit (Switchable) | G, KG, N, KN, LB |
| Load Resolution | 1/100,000 |
| Load Accuracy | < ± 0.5% |
| Stroke (exclude the grips) | 400 500 600 mm (can be adjusted higher by requirements) |
| Test speed | 0.1~500 mm/min Selectable |
| Effective Width | 400 mm |
| Operation Mode | Controlled by PC |
| Weight (exclude the grips) | 130 Kg |
| Display | PC (can be programmed any of the customer's data ) |
| Motor | AC Servo Motor |
| Dimension(L×W×H)-Main Unit | 1200×600×1500cm |
| Dimension of the testing space | 400×400×700mm |
| Testing width | 40cm ( can be widened by requirements) |
| Power | 1#, 220V, 10A |
| Rotation method | high precision ball screw rod |
| Fixture | can be customized stretching and compressing fixture |
Temperature control chamber:
| Items | Specification |
| Temperature range | -40°C ~150°C |
| Control method | P.I.D Automatic calculation |
| Humidity range | 20%~98% |
| Tem & Hum accuracy | ±0.5°C, ±2.5% RH |
| Temp& Humid regularity | ±2°C, ±3% RH |
| Compressor | France Tecumseh |
| Cooling Speed | 1 °C/ min |
| Counter | LED,0~9999.99 |
| Inner material | SUS 304 Stainless steel |
| Inner Chamber size | (L×W×H)40×40×70cm (can custom) |
Features :
1. Motor system: Panasonic servo motor +Servo driver +High precise
ball screw (Taiwan).
2. Control system: a, computer control with TM2101 software; b,
Back to origin automatically after the test, c, store data
automatically or by manual operation.
3. Data transmission: RS232.
4. Displacement resolution: 0.001mm.
5. Graph scale automatic optimization can make graph to display
with best measurement and can implement graphics dynamic switching
in the test and has force-elongation, force- time, elongation
-time, stress - strain.
6. It can save results automatically after test finished, and it is
manual filing. It can display maximum force, yield strength,
compressive strength, tensile strength, elongation, peel interval
maximum, minimum and average, etc.
7. User can set parameters of product material such as length,
width, thickness, radius, area and so on.
8. Languages:English.
Standard:
ASTM D903 Cns-11888 JIS K6854, Pstc-7
