|
[China]
Trade Verify
Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China
Contact name:Seline Yu
DONGGUAN YUYANG INSTRUMENT CO., LTD |
|
Verified Suppliers
|
|
|
600N Furniture / Chairs Seats Front Stability Test Machine 60mm from front edge
Introduction:
This machine is suitable to test the seats (such as chairs, office chairs) front stability.
Principle:
Put the test-piece on the test table, blocked the front leg, apply
specified force with forward 20N applied at seat loading point,
check the article tends to overturn forward or not to determine the
test-piece forward stability performance.
Technical parameters:
Seat surface loading:Max:600N, cumulation
Horizontal force:20N
Loading point position:seat surface center position,60mm from front edge
Seat surface loading pad:diameter:200mm, camber surface:R300mm,9 pins
Loading rob:19mm,both ends A type:sphere SR19mm B type: sharped surface 45 °
Weights basket lifting:manual control
Dimensions(WxDxH):100x140x105cm
Weight:500kg
Air source:6kgf/cm2 stable air source
Standards: EN 1022,EN 1729-2 and ANSI/BIFMA X5.1 12.4 Front Stability
| Seat surface loading:Max: | 600N, cumulation |
| Horizontal force: | 20N |
| Loading point position: | seat surface center position,60mm from front edge |
| Seat surface loading pad:diameter: | 200mm, |
| Loading rob: | both ends A type:sphere SR19mm B type: sharped surface 45 ° |
| Weights basket lifting: | manual control |
| Dimensions(WxDxH): | 100x140x105cm |
| Weight: | 500kg |
| Air source: | 6kgf/cm2 stable air source |
| camber surface | R300mm,9 pins |
