DONGGUAN YUYANG INSTRUMENT CO., LTD |
Verified Suppliers
|
|
ISO 5659-1 ISO 5659-2 Plastic Smoke Density Flammability Testing Equipment
Products:
The main principle is to measure smoke density in a particular
space, cable or material produced under specific conditions of
combustion or713 radiation. The smoke will course the beam
attenuate when passes through the smoke, the light transmittance be
use to calculate ratio of the optical density and smoke density.
Smoke density boxes is designed according to ISO5659 standards and
also combined the standard of ASTM E662, NES711. IT IS with a
conical radiant furnace, heat flux can be up 50 kW / m2, and
laterally positioned sample, it also can test the sample mass loss
rate.
Standards:
ISO 5659-1: Plastics - smoke - Part 1: Optical Density Test
Principle
ISO 5659-2: Plastics smoke generated -Part 2: single box test to
obtain optical density of the material
Box structure:
1, The tester is consist of cabinet, sample case, the radiation
cone, ignition, light and measuring devices and other relevant
control device component;
2, The structural design and control design considers the
ergonomics; The test box is with full door design approach; lock
design for easy one-time close the door; optimize operational
processes;
3, The test has fully opened door for easy loading and unloading of
samples and cleaning the box;
4, The front door hinge installation with Windows and window has
block the activity window opaque visor to prevent light from
entering the sealed box;
5, The controller is located in the side of the box, easy to
operate. When the door is closed does not affect the view
controller;
6, Security flameout board, replace the simple, safer operation;
7, Which provides gas measurement port for gas toxicity test;
8, The test box for easy cleaning and coating chemical resistance;
Combustion means:
1, The heating cone: Power 2600W, input temperature range of 0 ~
1000 ºC, can be stable within ± 2 ºC within 50 minutes, providing
irradiance 10KW / m²-50KW / m² of.
2, The use of mass flow controllers and differential pressure
sensor can improve the accuracy of piezometers and automatic leak
test
3, Ignition with automatic ignition devices; flame length 30mm ±
5mm; in accordance with standards prescribed blue flame with a
yellow tip;
Smoke density measuring system:
1, Smoke density and temperature are digital display, viewing more
convenient, more accurate values
2, Photodetector assembly includes a photomultiplier, amplified
filters, shutters, filters, neutral density filter, a lens, an
optical window, and other components;
3, The light source is 6.5V incandescent light sources;
4, The installation of optical cartridge box at the top, light
accepted as side-on photo-multiplier, light transmission rate of
0.001% accuracy can be achieved
5, Achromatic lens
6, Japan imported Photo-multiplier tubes
7, High-gain low-noise amplifier control circuit
Control System:
1, Automatic completion of the test; automatic acquisition of
various signals; And test report could be print from computer.
2, Brand computers,
3, The printer is optional
4, Voltage: 220V Power 4KW;
5, Customer-owned propane gas;