Dongguan HOOHA Electrical Equipment Company Limited |
|
High Speed 1.5mm 2.5mm 4mm 6mm 10mm 16mm2 Cable wire extrusion machine
Description:
It's the whole production line of 1-16mm2 cable, from the copper
wire extruding to cable collecting.
Producing Process:
1. Extrusion --- 80+35 extrusion machine
2. Collecting --- 630/1250mm collecting machine
Feartures
1.High configuration,main electric parts are importing,
2.The screw surface is carbonized and quenched, electroplated with
hard cr. ,Gear tooth surface abrasion resistance.
3.big quantity of extrusion,Low energy consumption of the
equipment,
4.high production efficiency than other supplier, high gloss
surface,
5.small temperature difference good stability,
6.strong continuity of working, convenient operation, long service
life.
wire extruder | ||||||||
technical parameters | ||||||||
machine type | HH- 65 | HH-70 | HH-80 | HH-90A | HH-90B | HH-120 | HH-150 | HH-200 |
pay-off shaft | double-shaft type | 800-1600 | 1000-2000 | 1600-2500 | 1600-3150 | |||
screw diameter | ø65 | ø70 | ø80 | ø90 | ø120 | ø150 | ø200 | |
screw L/D | 25:01:00 | |||||||
MAX. extrusion output | 130kg/h | 150kg/h | 200kg/h | 250kg/h | 280kg/h | 400kg/h | 650kg/h | 900kg/h |
motor power | 25HP | 30HP | 40HP | 50HP | 60HP | 70HP | 100HP | 150HP |
wire diameter | ø1.2-10mm | ø1.5-12mm | ø2.0-20mm | ø3.0-25mm | ø10-40mm | ø15-60mm | ø30-120mm | above ø40mm |
cooling device | single layer/double layers U type | single layer U type | ||||||
haul-off power | 5HP | 7.5HP | 10HP | 15HP | 20HP | 10HP | ||
MAX. line speed | 500m/min | 450m/min | 400m/min | 200m/min | 100m/min | 60m/min | 60m/min | |
take-up type/power | double-shaft bundle packaging | ø1000mm-2000mm | ø1600mm-2500mm | ø1600mm-3150mm | ø2000mm-3500mm |