5.00mm 20MPa Electric Hydraulic Cylinder TRH5.00ME5LT14X18.00

Hydraulic Oil Cylinder TRH5.00ME5LT14X18.00 

Bore Size 5.00mm 20MPa Stroke 13-15mm

Product Description:

The Parker Series 2H Heavy Duty Hydraulic Cylinder is designed for superior performance, durability and trouble-free operation. Through careful design and the use of high-quality materials during manufacturing, Parker cylinders deliver long service life and reduced operational costs. Stand-out features such as the "Jewel" rod gland, hard chrome plated piston rods, and stepped cushions reduce downtime, improve cycle times and increase system efficiency, ultimately increasing productivity. To ensure customer satisfaction, every Parker cylinder is tested before it leaves the factory, guaranteeing proper performance and leak-free operation.

When you need a reliable and successful hydraulic cylinder for your industrial application demands, you can trust the Parker Series 2H. It is made with quality materials for longevity, excellence and value.

Features:

Primary Seal – TS-2000 Rod Seal is a leakproof design that is designed to self-compensate and self-relieve variations that may occur due to mechanical deflection.

“Jewel” Rod Gland Assembly – It can be removed externally without any need to disassemble the cylinder. The long bearing surface is on the inside of the seals to ensure that positive lubrication is provided from the inside of the cylinder. An o-ring is used both as a seal between the gland and the head, and as a prevailing torque-type lock.

Secondary Seal – Double-Service Wiperseal™ helps to clean any oil film on the rod when the extend stroke occurs, and then cleans the rod on the return stroke.

Piston Rod Stud – It is provided on rods of 2.000" diameter and below if a standard style #4 rod end thread is required. Threads in such rods are designed to be rolled threads with the use of high strength steel, and an anaerobic adhesive helps to permanently lock the stud and the piston rod together.

Piston Rod – It is made of medium carbon steel which has been induction casehardened, hard chrome-plated and polished with a 10 RMS finish. Piston rods made in between .625" and 4.000" come with a minimum yield material of 85,000 to 100,000 psi, while larger diameters have a range of 57,000 and 90,000 psi.

Ports – The standard ports are of the SAE “O” ring variety. Optional Ports Ports – NPTF ports are also available without an extra charge, while oversized NPTF and SAE ports may come with an extra charge.

Adjustable Floating Stepped Cushions – These provide a maximum performance when used in any applications and help to reduce shock. Cushions, while optional, can be furnished at head end, cap end, or both without a change to the envelope or mounting dimensions.

One-Piece Nodular Iron Piston – This is designed to reduce bearing loads with its wide and piston surface that contacts the cylinder bore. To lock and seal the piston to the rod, an anaerobic adhesive is used.

Applications:

Extended Tie Rod Mountings – TB, TC, and TD

Application:

• Straight line force transfer

• Compression loads (push) – use TC or TD

• Tension loads (pull) – use TB or TD

Advantages:

• Ease of mounting in tight spaces

• Force is transferred along the centerline of the cylinder

Flange Mountings – J, JB, JJ, H, HB, and HH

Application:

• Straight line force transfer

• Compression loads (push) – use H, HB or HH

• Tension loads (pull) – use J, JB, or JJ

Advantages:

• Rigid base mounting due to large flange area

• Force is transferred along the centerline of the cylinder

Trunnion Mountings – D, DB, DD and DE

Application:

• Curved or arc line force transfer

• Can be used in compression or tension loads

• Compression loads – use DB or DD, DE mountings

• Tension loads – use D, DD or DE mountings

Advantages:

• Ease of mounting

• Design flexibility

• Self aligning

Technical Parameters:

Customization:

1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR REPLACEMENT.

There are NO EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR,you may choose to have a replacement.
you may choose to have a replacement. EXCEPTIONS!
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your po#.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from aliexpress. OR, you may choose to have a replacement.

Support and Services:

FAQ: