|
[China]
Trade Verify
Address: Wuliyao Industrial Zone, Yanshan County, Cangzhou City, Hebei Province, China
Contact name:laura
Hebei Hongcheng Pipe Fittings Co., Ltd. |
|
Verified Suppliers
|
|
|
Hebei Hongcheng Group Co., Ltd. is a global manufacturer, stocker
and exporter of Standard ASME B16.9 Stainless Steel Fitting Tees,
we also manufacture ASME/ANSI B16.9 Fitting Tees, ASTM A403 SS ASME
B16.9 Fitting Tees , Monel Buttweld ANSI B16.9 Fitting Tee, ASME B16.9 Butt Welding
Fitting Tee, 304 SS ASME B16.9 Fitting Tee, Alloy Steel ASME B16.9
Fitting Tee, ANSI B16.9 Butt Fitting Tee, Available in all sizes.
Chemical Composition:
| Chemical Composition of ASTM A234 | ||||
| Element | WP5 | WP9 | WP11 | WP91 |
| C | Max 0.15 | Max .15 | 0.05 - 0.15 | 0.08 - 0.12 |
| Mn | 0.30 - 0.60 | 0.30 - 0.60 | 0.30 - 0.60 | 0.30 - 0.60 |
| P | Max 0.040 | Max 0.030 | Max 0.030 | Max 0.020 |
| S | Max 0.030 | Max 0.030 | Max 0.030 | Max 0.010 |
| Si | Max 0.50 | 0.25 - 1.00 | 0.50 - 1.00 | 0.20 - 0.50 |
| Ni | - | - | - | Max 0.40 |
| Cr | 4.0 - 6.0 | 8.0 - 10.0 | 1.00 - 1.50 | 8.0 - 9.5 |
| Mo | 0.44 - 0.65 | 0.90 - 1.10 | 0.44 - 0.65 | 0.85 - 1.05 |
| Cu | - | - | - | - |
| Cb | - | - | - | 0.060 - 0.10 |
| V | - | - | - | 0.18 - 0.25 |
Mechanical Property:
| ASTM A234/A234M | Tensile strength, min
| Yield Strength, min | Elongation,%, min | |||
| Grade | Ksi | Mpa | Ksi | Mpa | Longitudinal | Transverse |
| WP5 | 60-85 | 415 - 585 | 30 | 205 | 22 | 14 |
| WP9 | 60-85 | 415 - 585 | 30 | 205 | 22 | 14 |
| WP11 | 60 - 85 | 415 - 585 | 40 | 275 | 22 | 14 |
| WP91 | 85 - 110 | 585 - 760 | 60 | 415 | 20 | - |
| Alloy Steel | A234: WP1, WP12, WP11, WP22, WP5, WP9, WP91 | 1.5423(16Mo5) 1.7335(13CMo44)/13CrMo4-5 1.7380(10CrMo9-10) 1.7362(12CrMo195) 1.4903/X10CrMoVNb9-1 |
| Carbon Steel | A234: WPA, WPB, WPC | 1.0305 (St35.8) /P235GH(1.0345) 1.0405(St45.8) /P265GH(1.0425) 1.0482(19Mn5) |
| Low-temperature Steel | A420: WPL3, WPL6, WPL9 | 1.5837/1.5637(10Ni14)/12Ni4 1.0488(TSTE285), TSTE355(1.0566) |
| Line Steel | A860: WPHY42, WPHY46, WPHY52, WPHY60, WPHY65, WPHY70 | 1.0457(StE240.7) 1.0484(StE290.7)/L290NB 1.0582(StE360.7)/L360NB 1.8972(StE415.7)/L415NB |
| Nonferrous metal: Nickel Alloy | B366: WPNC(UNS N04400/Monel400) WPHC22(UNSN06022/Hastelloy C22) WPNC1(UNS N06600/Inconel 600) WPNCMC(UNS N06625/Inconel 625) WP20CB(UNS N08020/Alloy 20)) WPNIC(UNS N08800/Incoloy 800) WPNIC10(UNS N08810/Incoloy 800H) WPNIC11(UNS N08811/Incoloy 800HT) WPNICMC(UNS N08825/Incoloy 825) WPHC276(UNS N10276/Hastelloy C276) WPHB-2(UNS N10665/Hastelloy B2) | |
| Nonferrous metal: Aluminum Alloy , Titanium Alloy | B361: WP3003(UNS A93003) WP6061(UNS A96061) B363: WPT1, WPT2, WPT3, WPT7, WPT9, WPT11
|
DIAMENSION OF ASTM B366 GRADE WPNCMC FITTINGS~
| Nominal Pipe Size | All Fittings | All Fittings | All Fittings | Elbows/ Tees | 180° Return Bends | 180° Return Bends | 180 Deg Return Bends | Reducers | Caps |
| NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) | Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
| ½ to 2½ | 0.06 -0.03 | 0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
| 5 to 8 | 0.09 -0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
| 10 to 18 | 0.16 -0.12 | 0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 20 to 24 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
| 26 to 30 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
| 32 to 48 | 0.25 -0.19 | 0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
FAQ:
1. Are you a factory or trading company?
We are a factory.we also have cooperated factory doing other steel business.
2. How can I get a quotation from you ?
You can leave us message, and we will reply every message in time. Or we may talk on line by Trademanager.
And you can also find our contact information on contact page.
3.Can I get samples before order ?
Yes, of course. Usually our samples are free. we can produce by your samples or technical drawings.
4. what is your delivery time ?
The time of delivery is usually around 20 days(1*20FT as usual).
We can send out in 2 days, if it has stock.
5.What is your payment terms?
Our usual payment term is 30% deposite, and rest against B/L. L/C is also acceptatble.EXW,FOB,CFR,CIF,DDU.
6.How does your factory do regarding quality control?
Quality is priority. Our factory has gained ISO9001 authentication. We guarantee the goods out from our factory 100% qualified.
And Each Process, we have very strict operation and arrange 2 techinians to inspect. After the products are finished,
we will make the last test to pick up the unqualified products
