Xenon Arc Weatherometer Environmental Test Chamber Spray Water Constant Temperature Cooling
Chamber
Performance:
1. Power 3200W
2. Compressor 1.5p
Spray water cooling system
1. Supply water spray cooling/heating machine and system (solenoid
valve, filter, 45 liter water tank, etc., (water tank volume 45L,
in order to activate a set of 4 nozzles within 18 minutes of safe
flow)
2. Integrate the water spray cooling/heating system to the test
phase box control system, the constant temperature control of the
water tank and the setting of the target value can only be
completed on the chiller;
3. The cooling/heating system can provide water with a stable set
temperature to the test box. According to the requirements of ASTM
D2526-2016 Cycle 1, it takes 18 minutes to continuously and stably
spray water at 21 degrees +/- 2 degrees. Cool/heat the return water
in the test box to 21 degrees within 100 minutes; +/-2 degrees
4. It can be connected to the test box via a computer and IP, can
monitor the real-time data of the cooling/heating system, and
control the start and stop of the cooling/heating system. It can be
operated on the touch screen or the linkage equipment can start and
stop synchronously. The temperature of the water tank can only be
set in cold water. Complete on board;
5. Adding two gates on the sprinkler pipe makes the sprinkler
system use a nozzle independently when testing short glass.
6. If only one set of nozzles is used, the amount of spray water
will be reduced and the amount of return water will also be
reduced. The 45 liters of water in the cooling/heating machine tank
will not be used up. The test system needs to pump an appropriate
amount of water back to the 45 liters tank for cooling/heating
according to the current situation. There is a liquid level sensor
to prevent the 45-liter water tank from being overfilled.
没有,