EN1400-2 Pacifier Anti-stab Test Fixture Used for Tensile Testing
Machine
Product introduction:
1. Mounted on a pull machine
2. The lower nipple fixing jig can move left and right to test
different parts of the teat
3. The lower nipple support plate requires a hardness of 97 IRHDs.
The center of the tip is pressed perpendicularly at the tip of the
nipple 15mm to 20mm, and a pressure of 200±10N is applied at
10±5mm/min for 1±0.5sec to check whether the nipple has been
punctured. .
Nipple anti-stab test fixture technical parameters:
Product size: 152mm*59mm*60mm (L*W*H)
Plastic plate size: 90mm*80mm*16mm(L*W*H)
Material: Stainless steel
Nipple anti-stab test fixture meets the standard:
GB28482-2012, EN1400-2Clause 6.2.2 Figure7 and 8, EN14350-1Figure8
and 9, EN14372 Figure5
Standard configuration: nipple anti-stick test fixture 1 set, test
method 1
