|
[China]
Trade Verify
Address: No.20 Xinghuo Road,Nanjing,Jiangsu,China
Contact name:Brian Wanqian
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
T91 Alloy Steel Economizers HF Hairpin Spiral Welded Steel Pipe
A213 T91 Alloy Steel Tubes , HF Welded Hairpin Spiral Fin Tube For
Economizers
ASTM A213 / A213M:Seamless Ferritic & Austenitic Alloy-Steel
Boiler, Superheater, and Heat-Exchanger Tubes
Quick Detail:
High Frequency Resistance Welded Helical Steel Fin Tubes is widely
used in the recovery of waste heat from boiler flue gas.
General specifications of HF welding fin tube |
Tube OD: 19mm min. |
General HF welding production capacity |
Welding Facility: 4 finning machines; |
Introduction:
High Frequency Resistance Welded Helical Steel Fin Tubes is widely
used in the recovery of waste heat from boiler flue gas.The fin
strip is welded continuously and spirally wound onto a polished
bare tube. And the tube and fins are bonded together by using high
frequency resistance welding technique. All of them are outside-Red
oxide zinc phosphate primer and inside volatile corrosion inhibitor
(VCI) in water soluble tablet form. Its suits various area such as
The High Frequency Resistance Welded Helical Fin Tubes are widely
applied in fired heaters, heat exchanger, boilers, economizers,
pre-heaters, coolers, heat pipes, heaters etc….
We produce both solid plain and serrated helical welded steel
finned tube. And also, all spiral welding tubes could be bent in
the middle or at the end of fin tubes, we call it Hairpin tubes.
Check:
Visual check:
Un-welded parts of fin, fin damage after fining, copper pollution,
tears, wrap etc…
Dimensional check:
Fin height, fin spacing, fin inclination, fin corrugation, length
of finned & un-finned portion etc…
Bending check:
Ovality, thickness and area reduction.
Specifications:
A wide range of fin and tube materials could be combinations are
available.
Items | General Materials | Popular ASTM Materials |
Core Tube Material | Carbon Steel , Alloy Steel, Heat Resistant Steel, | 10#,20#,15CrMo,Cr5Mo,Cr9Mo,1Cr18Ni9Ti,0Cr18Ni9,
00Cr17Ni14Mo2,SA106B,SA106C, SA192, SA179, |
Fins Material | Carbon Steel , Alloy Steel, Heat Resistant Steel, | Q235-BF,08F,08AL, 1Cr18Ni9Ti, 0Cr13, 1Cr13, 0Cr18Ni9, 09CrCuSb, CS,A1008-B,SPHC, SPCC, TP304/304L,TP316/316L,TP321/321L,etc. |
Dimensions Data Sheet We Can Supply.
Solid Helical Steel Fin Tubes Fabrication Range | Solid fins(mm) | Serrated fins | ||
Min | Max | Min | Max | |
Tube OD(mm) | 19 | 219 | 19 | 219 |
Fin Height(mm) | 8 | 26 | 8 | 32 |
Fin Thickness(mm) | 0.8 | 2.8 | 1 | 1.6 |
Fins Density(mm) | 4(250FPM) | 20 | 3.3(303FPM) | 20 |
Tube Length(mm) | N/A | 18000 | N/A | 18000 |
Additional supply range : | ||||
Competitive Advantage:
We have more than 10,000 square meters workshop, including 4 ERW high Frequency welding fining lines, daily production capacity around 40 Tons;
Our quality assurance plan for High Frequency Welding Spiral Steel Tubes. (2.1) Raw material control for both plain tubes and fins. (2.2) In process control with reports,as WPS, PQR&WPQ; weld deposition efficiency test before fabrication, Non-destructive test and tensile test etc. (2.3) Final inspection control with reports (Visual and dimensional check etc…).
The High Frequency Resistance Welded Fin Tube is integrally extended for the max surface area to achieve efficiency. The heat transfer ratio of high frequency welding fin tube is about 8~9 times higher than other plain tubes.
This Welded Helical Fin Tubes is a singular integral unit, eliminating heat contact resistance and losses. Generally tube side temperature up to 800 degree for stainess steel fins; Low carbon steels, withstanding up to 475 degree is the most common choice.
