|
[China]
Trade Verify
Address: No.20 Xinghuo Road,Nanjing,Jiangsu,China
Contact name:Brian Wanqian
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd. |
|
Verified Suppliers
|
|
|
Boiler Wall Thickness 0.8mm A210 Carbon Steel Seamless Tube
ASTM A210 Seamless Carbon Steel Tube , Boiler Steel Pipe Wall
Thickness 0.8mm - 15mm
Description:
ASTM A210 is the standard covers seamless medium-carbon steel
boiler and superheater tubes.ASTM A210 also covers
minimum-wall-thickness, tubing sizes, boiler flues including safe
ends, arch and stay tubes. ASTM A210 provides tensile and hardness
properties but only applicable to certain size limitations.
Material manufacturing shall be killed. Tubes shall be made by
seamless process, marked as either hot-finished or cold-finished.
Surface condition shall be specifically stated in the order.
Chemical composition shall conform to the requirements. Elemental
composition other than listed here shall not be permitted. Tension
test, flattening test, flaring test, hardness test, hydrostatic or
nondestructive electric test shall be made on specimens.
Superheater tubes shall be formed without defects and shall
withstand expansion, beading, forging, welding, and bending.
ASTM A210/A210M Seamless Medium-Carbon Steel Boiler Tubes
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Quick Detail:
Standard: ASTM A210/A210M (ASME SA210/SA210M)
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Size:(mm)
Out Dimensions: 12.7mm-114.3mm
Wall Thickness: 0.8mm-15mm
Length: 5-25mm
Applications:
It is used for boiler and boiler flue tubes. Including safe end,
vault and supporting tube and super heater min wall thickness
seamless medium--carbon steel tube
Chemical Requirements:
| STANDARD | GRADE | CHEMICAL COMPOSITION | |||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
| ASTM A210 | A-1 | ≤0.27 | ≥0.10 | ≤0.93 | ≤0.035 | ≤0.035 | |||||
| C | ≤0.35 | ≥0.10 | 0.291.06 | ≤0.035 | ≤0.035 | ||||||
Mechanical Properties:
| Grade | Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) |
| A-1 | ≥255 | ≥415 | 30 |
| C | ≥275 | ≥485 | 30 |
Wall Thickness Tolerance
ASME SA-210 | OD | WT | WT Tolerance |
| <=38.1 | / | +20%,-0% | |
| >38.1 | / | +20%,-0% |
Our Service:
1. Inquiry-Professional quotation, or send inquiry item more
details, we start contact more details
2. Confirm the price, lead time, payment term etc
3. Our sales send the Proforma Invoice with our seal, or you order
online to us
4. Customer make the payment for deposit and send us Bank receipt
5. Initial Production Stage-Inform the clients that we have got the
payment, and will make the samples according to your request, send
you photos or samples to get your approval. After approval, we
inform that we will arrange the production & inform the
estimated time
6. Middle Production-send photos to show the production line which
you can see you products. Confirm the estimated delivery time
again.
7. End Production-Mass production products photos and samples will
send to you for approval. You can also arrange the third party
inspection
8. Clients make payment for balance and ship goods, inform the
tracking number and check the status for clients
9. Order can be say "finish" when you receive the goods and satisfy
with them
10. Feedback to our about Quality, Service, Market Feedback &
Suggestion. And we can do better
