Active Member
|
[China]
Address: Optical Valley Industrial Park, Wuhan, China
Contact name:Yu Ying
Wuhan Geehe Optical Communication Co.,ltd |
|
|
Fiber Protection Sleeves 24mm_ribbon 8F Heat Shrinking For Cable Splicing
Brief Introduction:
Fiber Optic Splice Protector consists of a cross-linked polyolefin sleeve for protection, a steel rod (ceramic rod for ribbon fiber) for reinforcing this splice and hot fusion tube insert for rebuilding the coating of the fiber.
This protector provides mechanical reinforcement at the joint point and maintains the optic transmission properties of the fiber optic cable.
Fiber Splice Heat Shrink Characteristics:
Provides Maximum Lasting Protection of Fiber for Splicing in Any Application
Variety of Single and Multi-Fiber Sleeves
Durable Tempered Stainless Steel Reinforcement Rods with Rounded and Polished Edges
Full-Length Strength Member for Total Fiber Support
Working Temperature : -45 ~ 110 °C
Shrinking temperature range:90~ 120 °C
Standard color: Clear Other 12 colors available: White, Blue, Grey, Yellow, Brown, Black, Orange, Pink, Red, Cyan, Green, Purple
Close Dimensional Tolerances
Heat Bonded Assembly
Fungus Resistant
RoHS Compliant
Specification & Characteristics:
| Project | Test Method | Typical Data |
| The Tensile Strength | ASTM d 2671 | 18Mp |
| Tensile Rate | ASTM d 2671 | 700% |
| Density | ISO R1183D | 0.94g/cm3 |
| Compressive Strength | IEC 243 | 25KV/mm |
| Volume Resistivity | IEC 243 | 1015Ω |
| The Dielectric Constant | IEC 243 | 2.5 |
| The Longitudinal Shrinkage Rate | ASTM d 2671 | ≤5% |
| The Rate Of Partial Wall | ASTM d 2671 | 10% |
| Size | Routine | 15,25,35,40,43,45,50,60 |
| Unconventional | Micro 15mm, 8 core 24mm, 12 core 40mm | |
| Operating Temperature | (-40 -+85℃) | |
| Initial Shrinkage Temperature | 120℃ | |
Fiber Fusion Splice Heat Shrink Application:
* The sealing structure provides good performance after melting, in the environment with temperature and humidity.
* Special for fusion splices, preventing it from breaking when being handled.
* The transparent color allows you to see the color of the fiber after fusion.
New Types Of Fiber Heat-shrink Tube Specification Technology:
| Item | Description | Sleeving | Outer tube (Heat-shrinkable) | ||||
| Diameter (Before shrink) | Diameter (After shrink) | Length | Inner Diameter | Outside diameter | Length | ||
| 1 | Fiber Protection Sleeves _11mm_φ1.9_Without Strength Member | 1.9±0.1 | 1.25±0.1 | 11±0.1 | 1.4±0.1 | 1.9±0.1 | 11±0.1 |
| 2 | Fiber Protection Sleeves _15mm_φ1_with Strength Member | 1.8±0.1 | 1.4±0.1 | 15±0.1 | 1.5±0.1 | 1.8±0.1 | 15±0.1 |
| 3 | Fiber Protection Sleeves _20mm_φ3_Without Strength Member | 3.9±0.1 | 2.5±0.1 | 20±0.1 | 3.4±0.1 | 3.9±0.1 | 20±0.1 |
| 4 | Fiber Protection Sleeves_20mm_φ4_Without Strength member | 4.4±0.1 | 3.0±0.1 | 20±0.1 | 4.0±0.1 | 4.4±0.1 | 20±0.1 |
