60mm Fiber Optic Splice Sleeve

 Fusion Splice Heat Shrink Protector Sleeves With 60mm Steel Support

Brief Introduction:

Fusion-Protection Sleeves: This consists of cross-linked polyolefin, Hot fusion tubing, and Stainless Reinforcing Steel Rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices.

Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before the shrinkage process.
the sealing structure makes the splice free from the influence of temperature and humidity in any environment.

The Shrinkable sleeve is applied to the optical fiber closure to fix and protect the fiber optic when splicing.

Fiber Splice Heat Shrink Characteristics:

-- Whole length 60mm
-- Outer diameter after recovery: OD 2.4 mm +/- 0.1mm
-- Hole diameter before recovery: OD 1.5 mm
-- Pin material: SS304 (high-quality stainless steel)
-- Pin diameter: OD 1.0 mm
-- Minimum installation temperature: 110°C
-- Max installation time: 60 seconds
-- Standard color: Clear / transparent
-- Compliant norms: UL224,MIL-I-23053, GR-1380-CORE, ZN-96 TPSA-006

Specification & Characteristics:

Fiber Fusion Splice Heat Shrink Application:

1. Fusion splicing
2. Fiber cable protecting
3. FTTH system
4. Rack-mount & Wall-mount terminal box
5. Optical fiber switch box and so on continue protection

Geehe Comm Serivce :