Active Member
|
[China]
Address: Floor 3,Building No.7,Tangtou 3rd Industrial Park,Shiyan Street of BaoAn District,ShenZhen City China
Contact name:Jenny
Shenzhen Optfocus Technology Co., Ltd. |
|
|
10/100/1000 Base T fiber optic switch 1310nm single 8 ports fiber switch with poe
Description
OFS-PE-GT2DT8-I with 8*10/100M PoE Ports + 2*1000M Ethernet Port, using high-quality high-speed network IC and the most stable POE chip, POE port meets 802.3af/at standard, this series of PoE Switch can be 10/100M Ethernet The network provides a seamless connection, and the PoE power port can automatically detect and power the powered devices that comply with the IEEE802.3af/at standards. The non-POE device intelligently detects no power and only transmits data.
PoE (Power over Ethernet) refers to the technology of providing dc Power supply to some IP-based terminals (such as IP telephone, wireless access AP, network camera, etc.) while transmitting data signals. These devices receiving dc Power supply are called receiving devices.
This series of POE switches, using 8 POE ports + 2 uplink Gigabit Ethernet port, the uplink port is to connect with the network equipment which provide data.
| Model | OFS-PE-GT2DT8-I | ||
| Connector Type | 8 Port 10/100M PoE + 2 Port 10/100/1000M Ethernet Uplink | ||
| Network Protocols | IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.3ab | ||
| PoE Parameters | PoE Standard: IEEE802.3at (30W) and IEEE802.3af (15.4w) PoE compatibility: IEEE 802.3af/at adaptive PoE port output: DC52V Power Pin : 1/2(+) ; 3/6 (-) | ||
| DIP | VLAN: Port isolation mode. In this mode, the PoE ports (1-8) of the switch cannot communicate with each other, and can only communicate with the UP-link port. The port AI mode is turned on. | ||
| Default: Normal mode, all port can communicate with each other, the transmission distance is within 100 meters, the transmission rate is 10M / 100M adaptive; The port AI mode is closed. | |||
| Extend: Link extension mode, 1-8 ports PoE power supply and data transmission distance can be extended to 250 meters, the transmission rate becomes 10M, and the port AI mode is turned on. | |||
| Network Media | 10BASE-T: Cat 3,4,5 UTP(≤100 meter) 10BASE-T: Cat 6 UTP(≤250 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) | ||
| Power Supply | Power input: AC100-240V 50/60Hz, Output: 52V2.3A, Power Budget: 120W | ||
| Performance Specification | Bandwidth: 5.6Gbps | ||
| MAC Address: 2K | |||
| Packet Buffer Memory: 768K | |||
| Packet Forwarding Rate: 0.1488M pps/each port | |||
| Forwarding Mode: Store-And-Forward | |||
| Led indicator | PWR | Power supply indicator(Red) | Lighting:Powered Un-Light:No Power |
SW |
DIP indicator(Green) | OFF: Normal Vlan: Lighting Extend: Slow flash | |
1-10 |
RJ-45 ACT indicator(Green) | Lighting:Connecting Flashing:Data Transmit Un-Light:Disconnect | |
Company Profile
