Active Member
|
[China]
Address: Floor 3, Building B, No. 24, Third Industrial Zone, Langxiii, Songgang Town, Baoan District, Shenzhen, Guangdong, China
Contact name:wang
Shenzhen Jiangfan Communication Equipment Co., Ltd. |
|
|
WDM Module
Wavelength division multiplexer is splitting and merging of wavelength optical passive components, is to use the low insertion loss of the fiber resources, through WDM combined wave, combine different wavelengths of light on an optical fiber transmission, at the receiving end, the wavelength division multiplexer of partial wave will be different light carrier to separate different signal multiplexing method respectively.
| Parameter | 100G Hz | 200G Hz | |
| Channel Wavelength(nm) | 1529.55~1561.42(ITU 20~60) | ||
| Center Wavelengtth(nm) | ±0.05 | ±0.1 | |
| Channel passband(@-0.5db bandwidth)(nm) | ＞0.22 | ≥0.5 | |
| Insertion Loss | Add/Drop Ch. | ＜1.0 | ≤0.9 |
| Express Ch. | ＜0.4 | ≤0.4 | |
| Channel Ripple(db) | ＜0.4 | ≤0.4 | |
| Isolation(dB) | Adjacent Ch. | ＞25 | ≥30 |
| Non-Adjacent Ch. | ＞35 | ≥40 | |
| Express Channel lsolation(dB) | ＞10 | ≥12 | |
| Insertion loss Temperature sensitivity(dB/℃) | ＜0.003 | ＜0.003 | |
| Wavelength Temperature Shifting(nm℃) | ＜0.002 | ＜0.002 | |
| Polarization Dependent Loss(dB) | ≤0.1 | ≤0.1 | |
| Polarization Mode Dispersion(ps) | ≤0.1 | ≤0.1 | |
| Directivity(dB) | ≥50 | ≥50 | |
| Return Loss(dB) | ≥45 | ≥45 | |
| Power Handling(mW) | ≤300 | ≤300 | |
| Operating Temperature(℃) | 0~+70 | 0~+70 | |
| Storage Temperature | -45~+85 | -45~+85 | |
| Package Dimension(mm) | Ø5.5xL34 or Specify | Ø5.5xL34 or Specify | |
♦High stability and reliability
♦Epoxy free optical path
Application
♦DWDM Network
♦Wavelength Routing
♦Fiber Optical Amplifier
♦CATV Fiber optic System
