Home Companies Shenzhen Unifiber Technology Co.,Ltd

Non Latching 5V D2x2B 1550nm Fiber Optical Switch LC UPC

Shenzhen Unifiber Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: 2F,Block 2, The Fourth Industry Park, ShuiTian Community,ShiYan,BaoAn Area,ShenZhen,China.

Contact name:Kerry Sun

Inquir Now

Shenzhen Unifiber Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Non Latching 5V D2x2B 1550nm Fiber Optical Switch LC UPC

Country/Region china
City & Province shenzhen guangdong
Categories Dimmers
InquireNow

Product Details

Single Mode 1310/1550nm Non Latching 5V D2x2B Bypass Optical Switch LC/UPC

 

D2×2B Mechanical Fiber Optic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications.

 

FeaturesApplications
Low insertion LossMetropolitan Area Network
Wide Wavelength RangeR&D in Laboratory
High Stability, High ReliabilitySystem Monitor
Epoxy-free on Optical PathConfigurable OADM
Low Crosstalk

 

 

Performance Specifications

ParameterD2×2B
Wavelength Range(nm)670~9801260~1650
Operating Wavelength670/785/850/9801310/1490/1550/1625/1650
Insertion Loss(dB)Typ:0.8 Max:1.2Typ:0.6 Max:1.0
Return Loss(dB)MM≥30?SM≥50
Crosstalk(dB)MM≥30?SM≥55
Polarization Dependent Loss(dB)≤0.05
WaveLength Dependent Loss(dB)≤0.25
Temperature Dependent Loss(dB)≤0.25
Repeatability(dB)≤±0.02
Power Supply(V)3.0 or 5.0
Lifetime(time)≥10^7
Switch Time(ms)≤8
Transmission Power(mW)≤500
Operating Temperature(℃)-20~+70
Storage Temperature(℃)-40~+85
Weight(g)16
Dimension(mm)(L)27.0×(W)12.0×(H)8.2(±0.2mm) customization is available.

1,Specifications may change without notice.

2,Above specification are for device without connector.

Pins

TypePinElectric DriveStatus Sensor
D2×2BOptical PinPin1Pin5Pin6Pin10Pin1Pin5Pin6Pin10
Non-latchingP1-P3,P1'-P3'--------CloseOpenOpenClose
P1-P4,P1'-P4',P3-P2,P3'-P2'V+----GNDOpenCloseCloseOpen


Electric

SpecificationsVoltageCurrentResistance
5V latching4.5~5.536~44mA125Ω
5V non-latching4.5~5.526~32mA175Ω
3V latching2.7~3.354~66mA50Ω
3V non-latching2.7~3.339~47mA70Ω

 

Hot Products

The ABF is the product that with small diameter, lightweight, highly flexibility and proper ...
Air Blown Mini Cable (MINI) is small size, light weight, enhanced surface outer sheath fiber unit ...
The outdoor FTTH flat drop cable constructed with 1 or 2 single mode fiber with G657A1 or G657A2, It ...
FTTH Flat Drop Fiber Optic cable,Designed for quick installation and ease in handling, serves as the ...
Uni-Tube All Dielectric Aerial Drop cable is Especially designed for Fiber to the Subscriber ...
1/2/4 core G.657A2 Outdoor FTTH Drop Cable GJYXCH is positioned in the center. Two parallel Fiber ...