Home Companies Shenzhen Unifiber Technology Co.,Ltd

1x1 Mechanical Multimode Fiber Optical Switch 5V 250um FC/UPC

Shenzhen Unifiber Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: 2F,Block 2, The Fourth Industry Park, ShuiTian Community,ShiYan,BaoAn Area,ShenZhen,China.

Contact name:Kerry Sun

Inquir Now

Shenzhen Unifiber Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

1x1 Mechanical Multimode Fiber Optical Switch 5V 250um FC/UPC

Country/Region china
City & Province shenzhen guangdong
Categories Other Switches
InquireNow

Product Details

1x1 Mechanical Single Mode/ Multimode Fiber Optic Switch Non-Latching 5V 250um FC/UPC

 

1x1 Mechanical Optical Switch is used to turn on and turn off optical signal. The 1x1 Mechanical Optical Switch is based on Advanced Optoelectronic Integrated Technology. With the development of optical communication, Optical Switch device is the key to a new generation of all-optical network in near future.

 

FeaturesApplications
Unmatched Low CostOptical Network
Low Insertion lossProtection/Restoration
High Channel IsolationOptical Singnal Routing
High Stability, High ReliabilityConfigurable Optical Add/Drop
Epoxy-free on Optical PathTransmitter and receiver protection
Latching and Non-latchingNetwork Test System

 

Performance Specifications

Parameter1×1-MM/SM
Wavelength Range(nm)850±401260~1650
Operating Wavelength8501310/1490/1550/1625/1650
Insertion Loss(dB)Typ:0.5 Max:0.8Typ:0.4 Max:0.6
Return Loss(dB)MM≥30 SM≥50
Crosstalk(dB)MM≥65 SM≥70
Polarization Dependent Loss(dB)≤0.05
WaveLength Dependent Loss(dB)≤0.25
Temperature Dependent Loss(dB)≤0.25
Repeatability(dB)≤±0.02
Power Supply(V)3.0 or 5.0
Lifetime(time)≥10^7
Switch Time(ms)≤8
Transmission Power(mW)≤500
Operating Temperature(℃)-20~+70
Storage Temperature(℃)-40~+85
Dimension(mm)(L)27.0×(W)12.6×(H)8.0

1,Specifications may change without notice.

2,Above specification are for device without connector.

Pins

TypePinElectric DriveStatus Sensor
1×1 Pin1Pin5Pin6Pin10Pin2-3Pin3-4Pin7-8Pin8-9
LatchingP1-P2V+GND----OpenCloseCloseOpen
Light close----GNDV+CloseOpenOpenClose
Non-latchingP1-P2V+----GNDOpenCloseCloseOpen
Light close--------CloseOpenOpenClose

Optical Route

Status OneStatus Two
5913b4844d407.png1498446206122042.png

Electric

SpecificationsVoltageCurrentResistance
5V latching4.5~5.536~44mA125Ω
5V non-latching4.5~5.526~32mA175Ω
3V latching2.7~3.354~66mA50Ω
3V non-latching2.7~3.339~47mA70Ω

 

Mechanical Dimensions

5913b73f2d837.png

 

Hot Products

The ABF is the product that with small diameter, lightweight, highly flexibility and proper ...
Air Blown Mini Cable (MINI) is small size, light weight, enhanced surface outer sheath fiber unit ...
The outdoor FTTH flat drop cable constructed with 1 or 2 single mode fiber with G657A1 or G657A2, It ...
FTTH Flat Drop Fiber Optic cable,Designed for quick installation and ease in handling, serves as the ...
Uni-Tube All Dielectric Aerial Drop cable is Especially designed for Fiber to the Subscriber ...
1/2/4 core G.657A2 Outdoor FTTH Drop Cable GJYXCH is positioned in the center. Two parallel Fiber ...