|
[China]
Trade Verify
Address: 2F,Block 2, The Fourth Industry Park, ShuiTian Community,ShiYan,BaoAn Area,ShenZhen,China.
Contact name:Kerry Sun
Shenzhen Unifiber Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
FRP fiberglass push pull duct rodder, electric push rod,with 9/10/11/12/13/14/15mm cable roller guide tip with braking
Duct rodder, also called fiberglass duct rodder, is composed of three parts: internal copper/steel wire, fiberglass rod, and outer polyethylene coating. Each duct rodder comes with a sturdy steel frame with different sizes according to the diameter and length of the rod. Some frames are equipped with wheels, also called wheeled duct rodder, which makes it convenient to move at the job site. FRP duct rodder is an ideal tool for underground jobs such as pulling cables and lines through conduits, tubes, pipes or ducts. For its high tensile strength, wear-resistant surface and elastic body, it is widely used in the fields of telecommunication, electric power, water conservancy, etc.
Features:
Strong non-conductive fiberglass rod construction
For longer conduit runs and underground duct
Rugged tubular steel reel with adjustable position.
Duct rods/duct rodders have Many applications, not only pulling the cable but also pulling electric tools, and it repair is very easy, and available.
Packing condition
Inside packing: one set to be packed by plastic woven tape.
Outside packing: carton box and pallet.
Customized packing
Specification:
| Name | fiberglass push pull rod |
| Other name | FRP duct rodder, electric push rod |
| Rod Diameter (mm) | 4mm-18mm |
| Rod Length (m) | 30m-500m |
| Frame Spec.(mm) | 1300x450x1330,1200x420x1220,980x350x1000, 680x240x700, etc |
| Wheel Diameter(mm) | 300mm |
| Wall thickness of Metal Frame | 2.2mm |
| Color | blue, yellow, red, white etc |
| Rod Inner | Extruded by fiber glass and high strength resin at high temperature |
| Rod Outer | High Density polyethylene coating |
| Iron Frame | Steel with high temperature sprayed plastic or Spray coating |
| Wheel | rubber |
| Brake | Yes |
| Drawing head | copper |
| Density | 55g/m |
| Working temperature | -40°C to +80°C |
| Breaking tension | 100kg |
| Bending Radius | 295mm |
| Technology | Pultrusion |
| Inside packaging | plastic woven strip wind around the frame |
| Outside packaging | carton |
