FTTH SC Fiber Optic Quick Connectors can provide a quick and easy
termination of fibers in the field. Options are available for 900
micron allowing the installer to terminate and make connection in
minutes at equipment and fiber patch panels. This connector system
removes any requirement for epoxy, adhesives or costly curing ovens
and polishing and fibe ederface inspection.
FeaturesEasily installed, Quick and easy fiber termination in the field.
Fast connecting and repeat, No special tools needed when installed.
Reliable, durability over 500 times mating
Low insertion loss and High return loss
Low environmental sensitivity, adopt to complex environment No epoxy and polishing required, No special tools needed when
installed.
Applications
FTTH & FTTx;
Passive Optical Networks;
Broadband, CATV.
ITEM | Technical Parameters |
Applicable for | Drop cable / Indoor cable |
0.9mm Tight Buffer Fiber, 2.0mm, 3.0mm Drop Cable |
Optical fiber diameter | SM(9/125), MM(50/125, 62.5/125) |
125μm ( 657A & 657B ) |
Tight buffer diameter | 250μm |
Fiber mode | Single mode |
Operation time | About 100s(no fiber cut) |
Insert loss | ≤ 0.3dB(1310nm & 1550nm) |
Return loss | > 50db(PC), > 55db(UPC), > 65db(APC) |
Fastening strength of naked fiber | >5 N |
Fastening strength of naked fiber holder | >10 N |
Tensile strength | >50 N |
Using temperature | -40~+75°C |
On-line tensile strength (20 N) | IL ≤ 0.5dB RL ≤ 5dB |
Mechanical durability (500 times) | IL ≤ 0.5dB RL ≤ 5dB |
Drop-off test (drop-off height 4m,once per direction, totally 3
times) | IL ≤ 0.5dB RL ≤ 5dB |
![](http://img.everychina.com/nimg/3f/0b/2980e5f71a1a4f9d31d5d579f36b.jpg)