Shenzhen Unifiber Technology Co.,Ltd |
Verified Suppliers
|
|
JS(04) series provide suitable for cable whose diameter is
10-23mm,they can be used in aerial,duct,and direct buried
application;These products are made of the high quality material
and with the mechanical sealing structure filled with the sealing
material.
The external components and fastening parts are all made of
stainless steel,it can be reopened and reused without changing
sealing material.
Item No. | GJS(04)-6 |
Size | 435x140x75mm |
Cable diameter | 10-12.5mm |
Capacity of splice tray | 24single fiber |
Cable port | 2 |
Max capacity | 48single fiber |
Sealing structure | Sticky cincture |
Feature:
All property indexes are in accordance with National YD/T814-1996
Standard.
The case body is made from imported high-intensity engineering
plastics(ABS) and formed the shape with mould plastics under high
pressure. It is in the shape of HALF rectangle, with the advantages
of less weight, high mechanical intensity, corrosive-resistance,
anti-thunderstruck and long service life.
The case body and cable entrance are sealed with adhesive rubber
strip(non-vulcanized) and sealed tape. Reliable sealing capability.
It can be re-opened and easy to maintain.
overlapping fiber-melting tray and separate insulation earth unit
make the disposition of the cores, expanding the capacity and
cable-earthen flexible, convenient and safe.
outer metal component and fixing unit are made of stainless steel,
so can be repeatedly used in different environments.
Main technical specification:
External Size: (length×width×height) 390 × 140×75
weight:1.2kg
optical fiber winding radius: ≥40mm
extra loss of fiber tray:≤0.01dB
fiber length left in tray:≥1.6m
fiber capacity: single: 48core
working temperature: - 40℃ ~ + 70℃
lateral pressure-resistance: ≥2000N / 10cm
shock-resistance:≥20N.m
Operations
choose the cable loop with proper outer diameter and let it go
through the optical cable. Peel the cable , take off the outer and
inner housing, as well as loose contract tube, and wash off the
filling grease, leaving 1.1~1.6mfiber and 30~50mm steel core.
u fix the cable pressing card and cable, together with cable
reinforce steel core. If the diameter of the cable is less than
10mm, first bind the cable fixing point with adhesive tape till the
diameter has reached 12mm, then fix it.
lead the fiber into the melting and connecting tray, fix heat
contract tube and heat melt tube to one of the connecting fiber.
After melting and connecting the fiber, move heat contract tube and
heat melt tube and fix the stainless (or quartz)reinforce core
stick ,make sure the connecting point is in the middle of the
housing pipe. Heat the pipe to make the two into one. Put the
protected joint into the fiber-laying tray.(one tray can lay 12
cores)
lay the left fiber in the melting and connecting tray evenly, and
fix the winding fiber with nylon ties. Use the trays from the
bottom up. After all the fiber has been connected, cover the top
layer and fix it.
position it and use the earth wire in accordance with the project
plan.
sealing the cable retainer nearing the inlet of splice closure and
the joint of the cable rings with sealing tape. And close the
unused inlets with plugs, with exposed concave parts of the plug
sealed with tapes. Then put sealing trips into the sealing groove
on the sides of the shell and grease the concave part of inlet of
the body between the two parts of the shell. Then close the two
parts of the shell and tighten it with stainless steel bolts. The
bolts should be screwed tightly with balanced force.
according to the laying requirement, position and fix the hanging
tool .