|
[China]
Trade Verify
Address: R102, #24 Huangcun East Road,Tianhe District, Guangzhou 510660
Contact name:Jack Zhou
Guangzhou UC Instruments., Co. Ltd. |
|
Verified Suppliers
|
|
|
100G/400G BERT Bit-Error Tester Support 9.953-11.3G/25-28G Fast Speed
| Model | MIN | model | max | unit | note |
| General parameters | |||||
| power supply voltage | 100 | 220 | 240 | V | Alternating current (ac),50-60HZ |
| Power consumption | 20 | W | |||
| Working temperature | 0 | 55 | ℃ | ||
| SIZE | 235 x 55 x 320 | mm | |||
| Bit error detector(ED) | |||||
| Input level range | 100 | — | 1200 | mVppd | Differential input, AC coupling |
| Input rate range | 9.953 | — | 29 | Gbps | |
| 100 | ohm | difference | |||
| Connector Type | SMA | difference,The front panel | |||
| Supported code types | PRBS 2n-1, n=7, 9, 10, 11, 15,23, 31, Up to 20 bits/Ch, user defined | rate 9.953~14.5Gbps | |||
| PRBS 2n-1, n=9, 15, 31 | rate 25~29Gbps | ||||
| Programmable code generator(PPG) | |||||
| Output level range | 200 | — | 1100 | mVppd | Differential, alternating coupling |
| Output rate range | 9.953 | — | 29 | Gbps | 9.953~14.5 / 25~29Gbps |
| Output impedance | 100 | Ohm | The differential | ||
An overview of the
UC9264A is a 100G product bit error tester. It can be used in the development and production testing of optical devices, high-speed cables, optical modules and communication systems. Supports multiple rates ranging from 9.953Gbps to 14.5Gbps and 25-29Gbps.
Application
apply to all kinds of light module (QSFP28 CFP2, CFP4, SFP28, SFP +, QSFP +, CFP) and the error testing subsystem
is suitable for all kinds of active, passive cable, active fiber ber test
acts as a signal source for a 10G, 100G test platform
Features
supports rates ranging from 9.953Gbps to 14.5Gbps, and 25 to 29Gbps
Integrates four programmable code generators and four bit error detectors.
internal integrated clock module;
Bit error detector integrated clock recovery unit;
