E-link China Technology Co., Ltd. |
Verified Suppliers
|
|
Fiber Optic Module 100GBASE-ZR4 QSFP28 1295nm To 1309nm 80KM
Transceiver Duplex LC
Optical Fiber Transceiver Advantages
► Compliant with QSFP28 Standard: SFF-8661 Rev 2.5, SFF-8636 Rev
2.10a
► High speed I/O electrical interface (CAUI-4) compliant with IEEE
802.3bm-2015
► 100GBASE-ZR4 point-to-point Ethernet links
► Rx sensitivity of -28dBm with enabled KR4 FEC in host for up to
80km SMF
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Unit | Notes |
Storage Temperature | TS | -40 | 85 | ºC |
|
Supply Voltage | VCC | -0.5 | 3.6 | V |
|
Relative Humidity (non-condensing) | RH | 5 | 95 | % |
|
Data Input Voltage Differential | lVDIP-VDINl | - | 1 | V |
|
Control Input Voltage | VI | -0.3 | VCC+0.5 | V |
|
Control Output Current | IO | -20 | 20 | mA |
Recommended Operating Conditions
Parameter | Symbol | Min. | Typical | Max. | Unit | Notes |
Operating Case Temperature | TOPR | 0 | - | 70 | ºC |
|
Power Supply Voltage | VCC | 3.135 | 3.3 | 3.465 | V |
|
Maximum Power Dissipation | PD | - | - | 6 | W |
|
Maximum Power Dissipation, Low Power Mode | PDLP |
- |
- |
1.5 |
W |
|
Aggregate Bit Rate | ABR | - | 103.125 | - | Gb/s |
|
Data Rate per Lane | DRL | - | 25.78 | - | Gb/s |
|
Control Input Voltage High | VIH | VCC*0.7 | - | VCC+0.3 | V |
|
Control Input Voltage Low | VIL | -0.3 | - | VCC*0.3 | V |
|
Two Wire Serial Interface Clock Rate | - | - | - | 400 | kHz |
Electrical Specification
High-Speed Signal: Compliant to IEEE802.3 CAUI-4 C2M
Low-Speed Signal: Compliant to SFF-8679
Pin Definitions
Ordering Information
Part No. | Application | Data Rate | Laser Source | Fiber Type |
LNK-QSFP28-ZR4 | 100GBASE-ZR4 | 100Gb Ethernet | EML | Single Mode Fiber |