Fast Ethernet Media Converter With Built-In PSU 10/100M WDM SC Fiber

Product Description:

The intelligent 10/100M adaptive fast Ethernet media converter, with its unique feature of notifying of link failure between electrical and optical ports, has the capability to replace a network managed media converter, resulting in a significant reduction in system costs.

The LNK-S1100N series Ethernet media converter is able to convert between 10Base-T and 100Base-TX twisted pair electrical signals and 100Base-FX optical signals. It extends the network transmission distance from 100m via copper cables to 120km via fiber optic cable.

This converter allows for data transmission in both electrical and optical networks using either the data link L2 store-and-forward technology or the PHY L1 cut-through technology. It also supports transmission in single mode single fiber.

Features:

• 10/100Mbps auto-sensed, facilitating network upgrade
• Built-in efficient switching core to implement flow control and reduce broadcast packets
• Full-duplex and half-duplex auto-sensed
• Support auto-sense of MDI/MDI-X, facilitating system commissioning and installation
• Support Link Failure Alert (LFA) optional
• Support half /full-duplex of FX and link failure alert with optional dip-switch
• Support 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch
• Support the transmission of 100Base-Fx or STM-1, compatible with other devices
• Support low-time lag transmission
• Support the transmission of extra-long packets up to1600 bytes
• Support the transmission of extra-long VLAN packets
• Support Quality of Service (QoS) , ensuring the transmission of VoIP packets
• Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime

Technical Parameters:

Access mode: 10/100Mbps

Standard: IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control

Wavelength: 1310nm/1550nm

Transmission distance: Single fiber single mode: 20/40/60/80/100 km
Category-5 twisted pairs: 100m

Port:

• One RJ45 port: for connecting STP/UTP category-5 twisted pairs
• One optical port: Single mode Single fiber: SC or FC (9/125μm)

Conversion means: Store and Forward mode or Cut-Through mode

Buffer space: Built in 128Kb RAM for data buffer

Flow control: Full duplex: flow control; Half duplex: back pressure

BER: <19-9

MTBF: 100,000 hours

LED indicator:

• POER (power supply)
• FX LINK/ACT (optical link action)
• FDX (FX full duplex)
• TX LINK/ACT (TP cable link/action)
• TX 100 (TP cable rate 100M)
• FX100 (fiber cable rate 100M)

Power supply: Internal: AC90~264V/DC100~380V input

Power consumption: <40W (the chassis at full load), <2W

Operating temperature: -10~55ºC

Operating humidity: 5%~90%

Maintaining temperature: -40~70ºC

Maintaining humidity: 5% ~ 90% non-condensing

Packing and Shipping:

Ordering Information: