|
[China]
Trade Verify
Address: Jinhui Building, No.68, Zhongtang Section, Guansui Road, Zhongtang Town, Dongguan City, Guangdong Province
Contact name:Coco zhou
Dongguan Wirecan Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
This equipment is applicable to outer surface extrusion of wires and cables for insulation materials such as PVC/PE
| Model | GF-50+35mm | GF-60+35mm | GF-70+35mm | GF-80+40mm | GF-90+40mm |
| Pay off type | Active type single axis tension pay off | Shaftless magnetic powder tension pay off | |||
| Screw | Φ50mm | Φ60mm | Φ70mm | Φ80mm | Φ90mm |
| Screw L/D ratio | 25:1 BM type | 25:1 BM type | 25:1 BM type | 25:1 BM type | 25:1 BM type |
| Extrusion output | 70kg/hr | 100kg/hr | 150kg/hr | 200kg/hr | 250kg/hr |
| Main motor power | 11kw | 15kw | 22kw | 30kw | 45kw |
| Insulation diameter | Φ 0.6 - 4mm | Φ0.8 - 8mm | Φ1.5 - 12mm | Φ3.0-15mm | Φ3.0-15mm |
| Temperature control | 5 segment | 6 segment | 6 segment | 7 segment | 7 segment |
| Cooling device | Single / double layer U type | ||||
| Capstan power | 4kw | 5.5kw | 7.5kw | 11kw | 11kw |
| Accumulator length | 250m | 250m | 200m | 200m | 200m |
| Accumulator type | level way | level way | level way | level way | level way |
| Outlet wire speed | Max200m/min | Max250m/min | Max300m/min | Max300m/min | Max300m/min |
| Take up type | Double axis | No- axis double bobbin | |||
| Take up bobbin | Φ400-500mm | Φ400-500mm | Φ500-630mm | Φ800-1250mm | Φ800-1250mm |
| Electrical control | Inverter + PLC ( For option) | ||||
| Item | qty. |
| Double head Active/passive pay-off | 1set |
| Vertical tension dancer | 1set |
| Main extruder | 1set |
| extruder for stripe extrusion | 1set |
| 1.5m pre-water cooling trough | 1set |
| Diameter gauge | 1set |
| 8m Single layer main cooling trough | 1set |
| 500mm Dual wheel capstan | 1set |
| 9m horizontal type cable accumulator | 1set |
| 15KVpower frequency spark tester | 1set |
| Meter counter | 1set |
| dual reel take up | 1set |
| Electrical control system (PLC control optional) | 1set |
| Powder device(optional) | 1set |
| Printer(optional) | 1set |
