|
[China]
Trade Verify
Address: Jinhui Building, No.68, Zhongtang Section, Guansui Road, Zhongtang Town, Dongguan City, Guangdong Province
Contact name:Coco zhou
Dongguan Wirecan Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
A. Suitable for various nylon sheath and low smoke halogen free
wire extrusion ,screw tube all adopts water cooling
B. Screw barrel :Adopt the latest Japanese structure design and the
strengthening structure is specially established according to the
different extrusion process requirements with view to adapt to
various low smoke halogen free extrusion
C. Crosshead:Low smoke halogen free or special crosshead
D. Heating and cooling system:coordinated with the special design
of the screw barrel,the machine is equipped with the special
heating and cooling system to satisfy the requirement of precise
extrusion of different compounds
E. Extrusion auxiliary machine:the machine is able to equip with
proper auxiliary machine(30/35/40 etc.),According to various
process requirements and after changing the crosshead and screw
nylon sheath wire can be produced immediately and the various
process requirements of single strip,double strip as double-layer
extrusion,etc.can be satisfied
F. Quality control:Equipped with outer diameter detection feedback
device,control product of outer diameter and concentricity
etc.Technological parameter,avoid wire diameter and insulation
thickness error,and the resulting rise in the cost of production
G. Electrical control:imported inverter+PLC touch screen control
| Technical parameters | ||||
| Machine type | GF-50 | GF-70 | GF-90 | GF-120 |
| Screw diameter | Φ50 | Φ70 | Φ90 | Φ120 |
| Screw L/D | 25:1 | |||
| Max.extrusion output | 70kg/h | 150kg/h | 250kg/h | 400kg/h |
| Motor power | 11KW | 22KW | 75KW | 132KW |
| Wire diameter | Φ0.6-4.0 | Φ1.5-12.0 | Φ3-25 | Φ20-80 |
| Cooling device | Folding type W/U type | |||
| Haul-off power | 4KW | 7.5KW | 11kw | 11KW |
| Wire-storage length | 150m | |||
| Max. Line speed | 200-500m/min | |||
| Take-up type | Double/single shaft bundle packaging/shaft packaging | |||
| No. | Item | type | qty. | function | Remark |
| 1 | Dual-cone flyer pay off | dual-reel type with hood | 1set | pay off | |
| 2 | 70mm High speed extruder | Φ70mm×26D | 1set | Extrude wire | compression ratios=1:1.8 |
| 3 | Laser guage | LGD-25 | 1set | Line width gauge | |
| 4 | Front-warm water trough | 2meter | 1set | cooling wire | |
| 5 | Vertical accumulator | 1set | accumulator wheel Φ300 | ||
| 6 | 90mm High speed extruder | Φ90mm×26D | 1台 | Extrude wire | compression ratios=1:1.8 |
| 7 | Laser guage | LGD-25 | 1set | Line width gauge | |
| 8 | control penal | PLC type | 1set | system control | |
| 9 | second-warm water trough | 2meter | 1set | cooling wire | |
| 10 | high speed printer | dynamic mixing type | 1set | for jacket layer printing | |
| 11 | double layer water trough | front 4meter,back 4*4m | 1set | cooling wire | |
| 12 | horizontal type accumulator | 12m | 1set | Tension control ,wire store | accumulator wheel Φ300 |
| 13 | double wheel capstan | Φ600mm | 1set | Cable traction | |
| 14 | Power Frequency sparker | 15KV | 1set | high-voltage test | |
| 15 | Double head take up machine | Φ800mm | 1set | rewinding cable | |
| 16 | PV cable special crosshead | U14 | 2sets | forming | |
| 17 | PV cable special LSZH screw | 2sets | forming | ||
| 18 | Spare parts | 1set |
