Active Member
|
[China]
Address: No.6 Huanglongshan N Rd East Lake Tech Zone, Wuhan, Hubei, China
Contact name:Nicole
Wuhan Penta Chutian Laser Equipment Co., Ltd. |
|
|
Medium - Power Low Noise Metal Laser Cutting Machine , Laser Metal Cutting Equipment
PENTA LASER
Penta Laser was set up in 2007 by Italian El. En. Group, has over 30 years experience in providing sheet metal working machinery. We specialise in high power laser cutting machines and laser welding machines, provide best solutions to our customers with high quailty. As been present in China for over ten years, Penta Laser has a significant manufacturing capacity and an efficient selling network in one of the the most dynamic markets in the world for manufacturing activities. Penta Laser (Wenzhou) was founded in 2013 to expand the Sales & Service on Asia-Pacific market due to the fastest growth rate in industrial Laser fields. As the largest high power laser cutting machine exporter in China, Penta Laser launch the 1st fiber 8,000W, 10,000W, 15,000W & 20,000W laser cutting machine in China market which represents the leading role in industry laser fields.
Fiber Laser Cutting System 1500W Raycus
Applications:
Fiber laser cutting is suitable for metal materials such as stainless steel, carbon steel, alloy steel, silicon steel, galvanized steel, nickel titanium alloy, chromium nickel iron alloy, titanium alloy and etc. It is widely used in aerospace, automotive, ship buliding, machinery manufacturing, elevator manufacturing, advertising production, household appliances manufacturing, medical devices, hardware, decoration, metal processing services, and other manufacturing industries.
FIBER VS CO2 VS DISC LASERS
| Fiber lasers | CO2 lasers | DISC lasers | |
| Transfer rate (electronic vs optical) | 30% | 10% | 15% |
| MAX. Output power | 50kW | 20kW | 8kW |
| BPP(4/5Kw) | ＜2.5 | 6 | 8 |
| Pump lifetime | ＞100,000h | NA. | 10,000h |
| Occupation(4/5Kw) | ＜1 ㎡ | 3 ㎡ | ＞4 ㎡ |
| Maintenance | No | Yes | Yes |
| Fiber delivery | Yes | No | Yes |
| Stability | Good | Good | Good |
| Absorbility -- Steel | 35 | 12 | 35 |
| Absorbility --Aluminum | 7 | 2 | 7 |
Cutting capacity
| Output power | Materials | Thickness (mm) | Speed (m/min) | Protection Gas | Gas pressure |
| 1500W | Stainless Steel | 2 | 9.5 | Nitrogen | 1.8 |
| 4 | 3 | Nitrogen | 2 | ||
| 6 | 1 | Nitrogen | 2 | ||
| 8 | 0.6 | Nitrogen | 2 | ||
| Mild Steel | 1 | 20 | Oxygen | 1.8 | |
| 2 | 7.5 | Oxygen | 0.6 | ||
| 3 | 5.5 | Oxygen | 0.5 | ||
| 6 | 2 | Oxygen | 1 | ||
| 8 | 1.3 | Oxygen | 1 | ||
| 10 | 1 | Oxygen | 0.8 | ||
| 12 | 0.9 | Oxygen | 0.8 | ||
| 14 | 0.8 | Oxygen | 0.8 | ||
| 16 | 0.6 | Oxygen | 0.9 |
Power cunsumption
| Equipment | Power consumption (kW/h) |
| Fiber lasers | ≦12 |
| Machine tools | ≦10 |
| Chiller | ≦3 |
| Air compresser | ≦5.5 |
| Air dryer | ≦0.25 |
| Exhaust device | ≦3.5 |
Running condition
Ambient Temperature 10-35℃
Humidity ≤75% (no condensation)
Pollution: no ash, oil mist or erodent gas
The equipment noise in line with national standards
Oil mist: not more than 15mg/m³
The equipment noise in line with national standards; equipment working environment due to air exhaust dust removing device to prevent damage to equipment components; no source or construction of the isolation trench around the equipment to prevent vibration, impact on equipment; wall imitation porcelain, ceiling, floor terrazzo.
Cutting Sample
