White Color Fiberglass Chopped Strand Mat 300gsm E - Glass For Automobile Plate

White Color​ 300gsm E-glass Fiberglass Chopped Strand Mat For Automobile Plate

Product Description

Fiberglass chopped strand mat is a non-woven E-or C-glassfiber mat, product manufactured by spreading continuous filament roving of 50mm in length randomly and uniformly in combination with polyester binder in powder form (or other binder in emulsion form). This product is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. 

Fiberglass chopped strand mat is made of chopped strands in 50mm length, with powder binder or emulsion binder. It is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, compression molding and continuous laminating processes. The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling towers etc.

300g e-glass fiberglass chopped strand mat is a glass fiber reinforced material made of glass fiber after short cutting and non directional uniform settlement. Powder or emulsion binder is applied. It is mainly applied to hand paste glass fiber reinforced plastic and mechanical forming industry, and it is easy to process and has several molding properties.

300g e-glass fiberglass chopped strand mat has rapid resin penetration together with a fast strand wet out time.The mat also brings a highly translucent finished laminates.Also,the fine strand input makes the fiber prominence at the finished laminates surface extremely low.It is an excellent pipes,boat hulls and decks,truck body panel and so on.

Product Specification

Area weight: 100g/m2, 150g/m2, 180g/m2, 200g/m2, 225g/m2, 300g/m2, 325g/m2, 375g/m2, 450g/m2, 600g/m2, 800g/m2

Width: 1.04m, 1.25m, 1.32m, 2.5m, 3m, 3.3m, etc.

Roll weight: 30kg,35kg, 45kg, 80kg, etc.

Product Features

1. Good wet-out, Easy to form, easy roll-out and air release.

2. Even thickness, low fuzz.
3. Good resistance to watering and chemical agents in anti-corrosion applications.
4. Very high tensile strength, suitable for filament winding or continuous laminating.
5. Smooth laminate surface, good laminate transparency.

6. Excellent weight uniformity

7. Fast wet out

8. Easy air release

9. Excellent transparency of finished products

10. Excellent laminate clarity

11. Low resin consumption

Product Applications

It is suitable for the applications by hand lay-up FRP moldings, such as: various sheets and panels, boat hulls, bath tubs, cooling towers, corrosion resistant, vehicles etc.