Convenient FFP1 Dust Mask PP Non - Woven Fabric Material Non -
Irritating To Skin
1 . Descriptions
- Polypropylene (P.P.) outer layer provides smooth lining and avoids
loose fibres.
- Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
- Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
- Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
- Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
- Better breathing provided by the exhalation valve.
- The ISO 9001 / ISO 14001 certified production guarantees the
reliability / regularity of the production and the control of the
environmental impact.
- Fabric: PP non-woven fabric
- Form fitting design; Soft non-irritating to skin
- Static dealt filter lays, efficiently filtrate & absorb
industrial toxic dusts, Fumes, mists, gases and vapors against
silicosis.
- Soft nose foam and adjustable nosepiece ensures custom shape and
increase the workers' comfort and acceptance
- Excellent water repellent and air permeability
- Fringe seal avoids open layer around the edges
- Maintenance/cleaning free, convenient to use.
2 . Mask CE Quality Standards
| CE Standard for Disposable Respirators |
| EN: 149:2001 + A1:2009 |
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard
: EN : 149 : 2001 + A1 : 2009
2 . Test
Machine : TSI 8130
3 . Test Flow :
95Liters/Min
4 . Test
Medium : NACL & DOP
3 . Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified
body n°0086.The PPE is subject to the conformity assessment
procedure based on internal production control plus supervised
product checks at random intervals (Module C2) set out in
Annex VII under surveillance of BSI , notified body n°0086.
4. How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow
headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower
strap below the ears.
- Strap must not be twisted.
- Using both hands,mould nose clip to the shape of the lower part of
the nose to ensure a close fit and good seal.Pinching the nose clip
using only one hand may result in less effective respirator
peformance.
- The seal of the respirator on the face should be fit-checked before
entering the workplace.
- If the user feels the bottom strap is too loose and it is not
possible to achieve a satisfactory fit of the mask a knot can be
tied in the strap.
5 . Expiry date
If maintained as per storage instructions , products can be
used up to 5 years from date of manufacture.
6 . Packing
Normal Packing 12pcs/box,240pcs/ctn
