|
[China]
Trade Verify
Address: No. 591, 20th floor, Building B, Shenglong Youyi City, High tech Zone, Zhengzhou City, Henan Province.
Contact name:Judy
ZHENGZHOU SHENGHONG HEAVY INDUSTRY TECHNOLOGY CO., LTD. |
|
Verified Suppliers
|
|
|
NPK Fertilizer Granulator Machine , Double Roller Press Granulator
Product Introduction
The electric motor drives the pulley, and the transmission belt is transmitted through the speed reducer to a pair of two high-pressure roller bodies with a sliding mold shell to perform relative work.
The DZJ-I extruder has two rollers interacting with each other by the work of a pair of split gears.
The two rollers of the DZJ-II extruder are driven directly by two output shafts on a dedicated reducer to achieve the purpose of extrusion.
During the production, raw materials enter the hopper and are pressed and formed by the high-pressure roller body. After the mold is released, it flows to the crushing and forming part in the lower part of the roller body.
The power of crushing and forming is the relative movement of a pair of crusher rollers driven by the sprocket of the active press roller shaft via a chain drive.
After crushing and screening in the working chamber, the finished particles pass through the screen to the discharge then come out of the machine.
Description of Granulator
It has the advantages of beautiful appearance, simple operation,
low energy consumption, long service life and high granulation
rate. It is the most advanced compound fertilizer granulation
equipment in China, and it is a kind of advanced compound
fertilizer granulation equipment, Products throughout the country.
The series of granulator for a wide range, with the following
characteristics:
1. No drying process, room temperature granulation, a molding, less
investment, quick, good economic returns.
2. Powerful operation is reliable, no waste discharge, stable
operation, easy maintenance, process layout is reasonable, advanced
technology, low production costs.
3. Raw materials are widely used for granulation of various raw
materials such as compound fertilizer, medicine, chemical industry,
feed, coal, metallurgy and so on, and can produce various kinds of
concentrations, including organic fertilizer, inorganic fertilizer,
biological Fertilizer, magnetic fertilizer, etc.) compound
fertilizer.
4. In particular, rare earth, ammonium bicarbonate, ammonium
sulfate compound fertilizer granulation, to fill the gaps, ranking
the leading domestic level, is the national environmental
protection technology for the promotion of the project.
Technical Parameters
| Model | DZJ-I 1.0 | DZJ-I 2.0 | DZJ-I3.0 | DZJ-I 4.0 | DZJ-II 1.0 | DZJ-II 2.0 |
| Capacity | 1-1.5 | 1.5-2.5 | 2.5-3.5 | 3.5-4.5 | 1-2 | 1.5-2.5 |
| Power | 15Kw | 18.5Kw | 30Kw | 45Kw | 15Kw | 18.5Kw |
| Press Roller | Φ150×22O | Φ150×30O | Φ186×30O | Φ300×30O | Φ150×22O | Φ150×30O |
| Feed Size | 0.5mm | 0.5mm | 0.5mm | 0.5mm | 0.5mm | 0.5mm |
| Product Size | Φ2.5~Φ10 | Φ2.5~Φ10 | Φ2.5~Φ20 | Φ2.5~Φ20 | Φ2.5~Φ10 | Φ2.5~Φ10 |
| Speed Reducer | ZQH350 | ZQH400 | ZQH400 | ZQH500 | ||
| Material Mositure | 2%~5% | 2%~5% | 2%~5% | 2%~5% | 2%~5% | 2%~5% |
Granule Strength and Apperance Type:
Shape of finished products | oval, irregular, wheat shaped, etc., can also be customized according to customer requirements. |
Material moisture requirement | not more than 10% |
The rate of ball formation | 95% |
Output | 1-4t/h ( can combine multiple granulators work together to increase output, see below technical process chart). |
Granule size | 3-8mm (popular market granule diameter: 2.8-4mm) |
Product Introduction
The electric motor drives the pulley, and the transmission belt is
transmitted through the speed reducer to a pair of two
high-pressure roller bodies with a sliding mold shell to perform
relative work.
The DZJ-I extruder has two rollers interacting with each other by
the work of a pair of split gears.
The two rollers of the DZJ-II extruder are driven directly by two
output shafts on a dedicated reducer to achieve the purpose of
extrusion.
During the production, raw materials enter the hopper and are
pressed and formed by the high-pressure roller body. After the mold
is released, it flows to the crushing and forming part in the lower
part of the roller body.
The power of crushing and forming is the relative movement of a
pair of crusher rollers driven by the sprocket of the active press
roller shaft via a chain drive.
After crushing and screening in the working chamber, the finished
particles pass through the screen to the discharge then come out of
the machine.
