Active Member
|
[China]
Address: SHIJIAZHUANG CITY, HEBEI PROVINCE, CHINA
Contact name:candy lee
HEBEI DIAOZHUO WIRE MESH EQUIPMENT CO.,LTD |
|
|
Machine Description
3-5mm roll mesh welding machine is a automatic roll mesh welding production line.
Material can be galvanized wire,black annealed wire,screw-thread steel wire,stainless steel wire
Line wires are feed from pay off stands.
Cross wires are cut by straightening and cutting machine.
Mesh opening: line wire opening can't be changed.It is formed by welding electrodes(welding heads) Line wire
mesh opening can only be multiplies by times.
Line wire opening is 50mm at least.
Cross wire opening is set by plc,by computer.It can be 10mm,20mm,30mm,40mm,50mm,Any mesh opening you want.300mm At most
One 20" container can load the machine
Machine parameters
| Wire diameter | 3-5 mm |
| Mesh opening | 50X50-300X300mm |
| Material | Galvanized Wire; Black Annealed Wire;Screw-thread steel Wire；Stainless steel wire |
| Welding Width | 2500mm |
| Welding Length | 6-12m |
| Weaving speed | 60 times/min |
| welding electrodes | 48 |
| Line wire | from coils |
| Cross wire | Pre-cut |
| Voltage | 380V or as your requirement |
| Rated Power | 165KVA*6 |
| Machine weight | 4.5t |
| DIMENSIONS | About 6×3.2X1.8m |
| Machine life | Over 10 years |
Advantage
one worker can operate machine easily
PLC touch screen,SIEMENS,DELIXI,Mitsubishi electronic components.
Touch screen is Taiwan famous brand
This machine is a full automatic roll mesh production line.Just feed the material,the machine can start working.
Automatic stop system for wire broken or other problem.
Water-cooling transformer.
