Active Member
|
[China]
Address: SHIJIAZHUANG CITY, HEBEI PROVINCE, CHINA
Contact name:candy lee
HEBEI DIAOZHUO WIRE MESH EQUIPMENT CO.,LTD |
|
|
3 d & EPS wall panel mesh welding machine board panel welding machine
Main technologies
1. The control panel is more intelligent, very easy to operate. (Panasonic PLC program)
2. The longitude wires should be inserted into slot tunnels (cast iron material), suitable for different diameter.
3. The cross wires are fed from cross wire feeder, controlled by step motor and SMC (Japan) air cylinder.
4. Pure red copper (upper) and chromised bronze (lower), durable.
5. Clutch motor and helical gear reducer connect the principal axis directly, welding stable.
6. Casting water-cooling welding transformers, high efficiency. The welding degree is adjusted by PLC.
7. Panasonic (Japan) servo motor+planetary reducer and SMC (Japan) air cylinders for pulling mesh.
8. The cable drag chain is Igus brand, imported from Germany, not easily hang down.
EPS&3D panel making machine
| Rated electrical power | 50kva X 8 pcs | ||
| Input voltage | AV 380V 50HZ or clients’ voltage | ||
| Air source allocation | 3 Cubic meter/MIN 0.6MPa | ||
| Applicable range | Core panel thickness | 50mm-100mm | |
| Truss wire configuration | double sided mesh ,different densities of truss wires | ||
| Production standard | Standard 3D panel | length | 3000mm |
| width | 1220mm | ||
| Nonstandard 3D panel | The length according to your requirement ≤6000mm | ||
| Material characteristic | Welded wire material | 2.0mm-3.0mm cold-drawing low-carbon steel wire | |
| Core panel material | Anti-flaming EPS board & XPS board | ||
| Gridding space of mesh | 50mm*50mm | ||
| Miss welding rate | ≤5% | ||
| Welding strength | (Single point)≥330N | ||
| Overall dimension | Length | 13500mm | |
| Width | 1800mm | ||
| Height | 1700mm | ||
| Weight | 4000kg | ||
