Active Member
|
[China]
Address: SHIJIAZHUANG CITY, HEBEI PROVINCE, CHINA
Contact name:candy lee
HEBEI DIAOZHUO WIRE MESH EQUIPMENT CO.,LTD |
|
|
PLC control fence welding mesh machine panel welding fence machine
fence mesh welding machine
| Model | DZ2500 | Welding speed | 40 -65times/min |
| Wire diameter | 2.5-6mm | Welding electrodes | 48pcs |
| Longitude wire space | 50-300mm | Longitude wire feeding | Pre-straightened&pre-cut |
| Cross wire space | 25-300mm | Cross wire feeding | Pre-straightened&pre-cut |
| Mesh width | Max.2.5m | Overall Size | 8.4*3.1*1.7m |
| Rated electrical power | 85kva*6 pcs | Weight | 4200kg |
Note:The line wires and cross wires should be pre-straightened and pre-cut.
1. This machine adopts Japan brand Panasonic PLC program
2. The input front-panel is Weinview touch screen
3. Schneider(France) low voltage electric,Schneider (France) Air switch
4. Delta(Taiwan) frequency inverter
5. ABB Switzerland switch
6. Brake motor &helical gear reducer connect principle axis directly,strong power
7. Panasonic servo motor for mesh pulling,high precision
8. Germany cable carrier on the side for mesh pulling
9. Step motor and SMC(Japan) air cylinder in the hopper device,the cross wire fall down from the hopper automatically
10. Adjustable longitude wire space and cross wire space
11. Water-cooling type welding transformers,PLC control welding degree,adjustable
12. The machine stops automatically if cross wires in the hopper are used up.
