Type (N)GRDGCGÖU Crane Mining Power Cable Ifting Devices, Material Handling Equipment, Hoisting Plants, And Transporting

Type (N)GRDGCGÖU Crane Mining Power Cable

This cable serves as a flexible low voltage power and control cable in various industrial settings.

It is suitable for use in chain systems and festoon systems, providing connection and control capabilities for lifting devices, material handling equipment, hoisting plants, and transporting machines operating under heavy mechanical loads.

Whether in dry, damp, or wet rooms, or in wet industrial conditions, this cable is designed to withstand high mechanical stresses and frequent bending during operation.

• Conductor: Features electrolytic annealed, class 5 stranded tinned copper wires, with the option for a plain conductor upon request.

• Separator: Allows for the application of a suitable tape over the conductor for added insulation and protection.

• Insulation: Utilizes 3GI3 Type elastomer compound for effective insulation and durability.

• Core Identification: Follows standards according to VDE 0293-308 for easy identification.

• Inner Sheath: Made of elastomer compound for additional protection and insulation.

• Screen: Consists of a tinned copper wire braid with approximately 80% coverage for shielding against external interference.

• Outer Sheath: Composed of 5GM3 type elastomer compound for robust protection against environmental factors.

Specifications:

• Rated Voltage: 0.6 / 1 kV

• Max. Operating AC Voltage: 0.7 / 1.2 kV

• Max. Operating DC Voltage: 0.9 / 1.8 kV

• AC Test Voltage: 3.5 kV

• Conductor Operating Temperature: Maximum 90ºC

• Conductor Short Circuit Temperature: Maximum 250ºC

• Working Temperature:

• Fixed: -40ºC to +80ºC

• Mobile: -25ºC to +80ºC

• Min Bending Radius: As per VDE 0298-3 Tab. 3

• Current Carrying Capacities: Compliant with VDE 0298-4 standards

• Travel Speed:

• In Festoon Systems: Up to 240 m/min

Compliance and Standards:

• Construction: DIN VDE 0250-814

• General Requirements: DIN VDE 0250-1

• Guide to Use: DIN VDE 0298-3

• Electrical Tests: DIN VDE 0472-501, 502, 503, 508

• Non-Electrical Tests: DIN VDE 0472-401, 402, 602, 303, 615

• Under Fire Conditions Tests: DIN VDE 0472-803, 804

• Flame Retardant: VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1

• Oil Resistant: HD/EN/IEC 60811-2-1, DIN VDE 0473-811-2-1

This cable is designed to meet the demanding requirements of mining environments, providing reliable power and control capabilities while adhering to strict safety and performance standards.

Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All pictures shown are for illustration purposes only. The actual product may vary. All the information is provided in good faith and is believed to be correct at the time of publication.