Type ÜNFLEX M' PUR Crane Reeling Mining Power Cable use as an energy and control cable in festoon or drag chain Systems

ÜNFLEX M’ PUR Crane Reeling Mining Power Cable

Designed for use as an energy and control cable in festoon systems and drag chain systems. Ideal for power supply connections to mobile equipment used in harsh working environments, including ergonomic handling systems.

The special polyurethane compound jacket provides excellent protection against hydrolysis and oil.

Specifications:

• Rated Voltage: 0.6 / 1 kV

• Max. Operating AC Voltage: 0.7 / 1.2 kV

• Max. Operating DC Voltage: 0.9 / 1.8 kV

• AC Test Voltage: 3.5 kV

• Min. Bending Radius: 6 x D (fixed application), 8 x D (mobile application)

• Current Carrying Capacity: According to VDE 0298 – 4

• Working Temperature:

• Fixed: -40°C up to +80°C

• Mobile: -30°C up to +80°C

• Conductor Operating Temperature: +90°C

• Conductor Short Circuit Temperature: +250°C

• Max. Tensile Load on Conductor: 15 N/mm²

• Max. Torsion: ±25º/m

• Travel Speed:

• In Festoon Systems: Up to 200 m/min

• In Reeling Applications: Up to 60 m/min horizontal

Construction:

• Conductors: Electrolytic, stranded, plain annealed copper wire Class 5 according to IEC 60228

• Insulation: All cores insulated with XLPE (Cross Linked Polyethylene)

• Lay Up: Central aramid (kevlar) strength member, cores laid up in concentric layers with short length of lay

• Inner Sheath: Special extruded Polyurethane compound

• Outer Sheath: Special extruded Polyurethane compound available in yellow, black, or orange

Compliance:

• Construction: Generally to IEC 60502

• General Requirements: DIN VDE 0250-1 and IEC 60502

• Flame Retardant: IEC 60332-1

• Oil Resistant: HD/EN/IEC 60811-2-1, DIN VDE 0473-811-2-1

Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All pictures shown are for illustration purposes only. The actual product may vary. All the information is provided in good faith and is believed to be correct at the time of publication.