Animal Feed Production Machine Poultry Animal Feed Production Line
Parameter of animal feed production machine
| Model | Power(kw) | Capacity(t/h) | Directions | Application |
| SZLH250 | 22 | 0.6-1.0 | According to the customer's different materials and the relative
output of different particle sizes, the output of large particles
is high, and the output of small particles is small. | Granular processing of various livestock and poultry feeds, aquatic
feeds, grass meal and organic fertilizers, and processing of
aquaculture feeds such as complete sets of units. |
| SZLH320 | 37 | 1.0-3.0 |
| SZLH350 | 55 | 3.0-5.0 |
| SZLH420 | 110 | 8.0-10.0 |
| SZLH508 | 132 | 10.0-18.0
|
The process of animal feed production machine
1. Storage of raw materials: There are many raw materials and
materials in the feed, and various forms of silos must be used. The
main raw materials such as corn, high grain and other grain raw
materials have good fluidity and are not easy to agglomerate, and
are mostly stored in silo, while the auxiliary materials such as
bran, soybean meal and other powdery raw materials have poor
scattering properties and are easy to agglomerate after being
stored for a period of time. The material is discharged and stored
in a room-type warehouse.
2. Cleaning of raw materials: Impurities in feed raw materials not
only affect the quality of feed products, but also directly affect
the feed processing equipment and personal safety. In severe cases,
the entire equipment may be damaged, affecting the smooth progress
of feed production. Clear. The cleaning equipment of the feed
factory is mainly based on screening and magnetic separation
equipment. The screening equipment removes large and long debris
such as stones, mud blocks, and sacks in the raw materials. The
magnetic separation equipment mainly removes iron impurities.
3. Crushing of raw materials: The technological process of feed
crushing is determined according to the required particle size, the
variety of the same material and other conditions.
4. Batching technology: At present, the commonly used technological
processes include manual batching, volumetric batching, batching
with one warehouse and one scale, batching with several scales in
multiple warehouses, batching with multiple warehouses and one
scale, etc.
5. Mixing process: It can be divided into batch mixing and
continuous mixing. Batch mixing is to mix various mixed components
according to the proportion of the formula, and send them into the
"batch mixer" that works periodically Mixing is carried out in
batches. This mixing method is more convenient to change the
formula, and the mixing between each batch is less. It is a
commonly used mixing process at present, and the opening and
closing operations are relatively frequent, so automatic program
control is mostly used.
6. Granulation process: (1) Ring die granulation: the quenched and
tempered materials are firstly removed by the security magnet, and
then evenly distributed between the pressing and mixing and
pressing dies, so that the materials enter the extrusion area from
the pressing area of the feeding area. The nip is continuously
extruded and divided by the pressing roller into the die hole to
form a columnar feed, which is cut into granular feed by the cutter
fixed outside the die as the die rotates.
7. In the cooling process, a large amount of hot pellet feed is
produced due to the introduction of high-temperature and
high-humidity steam while the material is squeezed during the
pelletizing process.
8. Screening: After the feed is processed by the crushing process,
some unqualified materials such as powder agglomerates will be
produced. Therefore, the crushed pellet feed needs to be screened
into products with neat particles and uniform size.
