Home Companies Ohmalloy Material Co.,Ltd

Colored Fluorine Silicone Rubber Insulated Resistance Wire 300 / 500v Rated Voltage

Ohmalloy Material Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: Room 311, No.1211, Mudanjiang Road, Baoshan district, Shanghai

Contact name:Qiu

Inquir Now

Ohmalloy Material Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Colored Fluorine Silicone Rubber Insulated Resistance Wire 300 / 500v Rated Voltage

Country/Region china
City & Province shanghai shanghai
Categories Electrical Wires
InquireNow

Product Details


High temperature and low temperature resistance, excellent electrical insulation, excellent chemical stability, high voltage resistance, aging resistance, long service life. Soft and easy to install.Features/Uses:

 

Application:

Widely used in the petroleum industry, with excellent temperature resistance, oil resistance, cold resistance.

 

Delivery requirements:

Short delivery of not less than 10 m is allowed as agreed in the contract. The quantity shall not exceed 10% of the total delivered length.

 

Specification structure and technical parameters :(common type)

Nominal conductor section

(mm²)

Conductor structure

root number/ single wire diameter

Insulation thickness

(mm)

The average diameter

(mm)

The maximum resistance of a conductor at 20 ℃

(Ω/km)

The length of the packing

(m)

0.21x0.500.651.8095500
12x0.150.601.8095500
0.316x0.150.601.8571.2500
0.423x0.150.501.8549.6200
0.528x0.150.602.2040.1200
0.7542x0.150.702.6026.7200
1.032x0.200.702.8020.0200
1.548x0.250.703.1013.7100
2.549x0.250.803.708.21100
4.056x0.300.804.305.09100
6.084x0.300.805.203.39100
1084x0.401.006.801.95100
16126x0.401.208.401.24100
25196x0.401.4010.400.795100

According to the technical agreement between the two parties, we can produce products of other specifications.

Fluorine rubber

Main properties and applications of fluorine rubber from the main chain structure, fluorine rubber can be divided into three basic types: fluorine carbon rubber, fluorine silicone rubber, Fluorinated phosphorous nitrile rubber.

1. Oil, solvent and chemical resistance

Compared with methyl vinyl silicone rubber, fluorine silicone rubber has excellent oil, solvent and chemical resistance. Even compared with fluorine rubber, oil and solvent resistance is good. Under the same medium, temperature, time, impregnation after all showed excellent durability, fluorine and silicone rubber is perhaps the only a - 68 ℃ ~ 232 ℃ under the nonpolar medium resistance of the elastomer. Fluorosilicone rubber also has good methanol-containing gasoline resistance. Even in the gasoline/methanol mixture system, its vulcanizate hardness, tensile strength, volume change is very small, after a 500h long immersion test, the physical properties have almost no change.

 

2. Heat resistance

 

The pyrolysis of fluorosilicone rubber is the same as that of silicone rubber, i.e. side chain oxidation, main chain fracture, side chain thermal decomposition and various compound reactions. Due to the main chain of the breakdown products can also cause fracture, so heat resistance is less than silicone rubber, usually under the temperature of 200 ℃ has started to oxidative aging. But by adding iron, titanium and rare earth oxides can make them get a small amount of heat stabilizer improved significantly, even at 250 ℃ high temperature also has enough heat resistance. The effect of temperature on fluorosilicone rubber is larger than that of silicone rubber, but smaller than that of fluorosilicone rubber. Also studied abroad fluorine silicone rubber in 150 ℃, 175 ℃ x 5000 x 2000 h h, under the condition of 200 ℃ x 4000 h life, the result is second only to methyl vinyl silicone rubber.

 

3. Cold tolerance

 

Fluorine silicone rubber and ordinary silicone rubber, low temperature performance is good. Since fluorosilicone rubber is a linear polymer composed of soft si-o main chain, its low temperature characteristics are better than fluorosilicone rubber with c-c main chain. Among them, the fluorine and silicone rubber (LS - 2370 - u) better low temperature properties, low brittleness temperature - 89 ℃, and the general fluorine rubber was about to 30 ℃.

 

4. Electrical performance and radiation resistance

 

The electrical properties of fluorosilicone rubber are similar to that of ordinary silicone rubber, but the special value of fluorosilicone rubber is that it changes little under the harsh conditions of high temperature, low temperature, humidity, oil, solvent, chemicals, ozone and so on. The radiation resistance of fluorine silicone rubber is not outstanding, but it is better than methyl vinyl silicone rubber.

 

5. Physical and mechanical properties

 

Fluorosilicone rubber and ordinary silicone rubber, vulcanized rubber mechanical strength (especially tear strength) is relatively low. Therefore, improving the strength of fluorosilicone rubber is also an important research topic.

 

6. Other features

 

Fluorosilicone rubber has excellent anti-aging resistance, which can keep good performance even after 5 years of exposure. Ozone is one of the most produced gases during elastomer aging, but no cracks or cracks were found in fluorosilicone rubber after dynamic or static tests. In addition, the mildew resistance, physiological inertia, anticoagulation of fluorosilicone rubber is also very good.

Hot Products

OhmAlloy142B (Common Name: 0Cr25Al5,Aluchrom-O) OhmAlloy142B is a iron-chromium-aluminium alloy ...
Question and Answer Q1:How can I contact with your company? A1:We have multiple communication ...
Production steel category 301/304/316/409L/410L/430/316L/304L/409/310S/321 200 series: 201,202,202Cu...
Specification 1.Production steel category 301/304/314/316/409L/410L/430/316L/304L/409/310S/321 2...
OhmAlloy153 is a iron-chromium-aluminium alloy (FeCrAl alloy) characterized by high resistance, low ...
Material OHM 142C 0Cr21Al6Nb 0Cr 25Al5 0Cr 23Al5 0Cr 19Al5 0Cr 19Al3 1Cr13Al4 Cr20Ni80 Cr15Ni60 ...