Active Member
|
[China]
Address: No.377 Changbang Road, Wujiang Economic and Technological Development Zone
Contact name:Chuanchuan Li
jiangsu jzer Automation Technology Co.,Ltd. |
|
|
Non Woven Disposable Mask Making Machine Automatic Control CE FDA
Approved
This Face Mask Manufacturing Machine is a fully automatic
one-to-two mask machine, one body machine drives two ear band
machines. After the main body machine outputs the mask body, the
mask body sheet is conveyed to the turning mechanism by the
conveyor belt structure, and the mask plate is flipped to the
conveyor belt connected to the ear tape machine through the turning
mechanism, and then the mask piece is conveyed to the ear tape
machine through the conveyor belt. On the front of the first mask
plate, finally, the mask sheet is placed into the mask plate of the
ear band machine by pressing down by the air cylinder. The ear band
machine then completes the welding of the ear band of the mask,
edging, etc. to complete an ear band mask. Production of products.
1. It uses aluminum alloy structure, which is sleek, solid and
rustless.
2. This model is equipped with new advanced conveyor belt, which
automatically collects products with high accuracy, so the work
need to do is collection and packing only.
3. Photoelectric detection of raw materials prevents errors and
reduces waste
4. Servo motor and step motor drive, high precision.
5. The machine mount uses pulleys and fixed feet, which is easy and
fast to move, strong in stability, and does not shake.
6. Computer PLC control, high stability, low failure rate and low
noise.
7. The equipment can be modified according to product requirements,
product size, length and thickness.
3. technical parameter
1. The length, width and height of the machine: the size of the
whole machine is subject to the actual 6500MM * 3500MM * 1600MM
2. Voltage: AC220V 50-60HZ
3. One-to-two production efficiency: more than 100 pieces / min
4. Power: 3.5KW
4. technical parameters
Import raw materials, automatic feeding, nose line cutting /
feeding, hemming welding, folding scene, forming welding,
photoelectric detection, automatic slicing, finished product
output, receiving tray sorting, full automation
No. | Name | Parameter |
| 1 | size | 6500 (length) * 3500 (width) * 1950 (height) |
| 2 | Weight | Total equipment weight ≤5000KG Ground load 3500KG / ㎡ |
| 3 | Color | Color Sheet metal warm gray 1C, primary color of aluminum profile |
| 4 | Working power supply | 220VAC ± 5% 50HZ grounding protection Rated power ≤10KW (including welding machine) |
| 5 | Compressed air | 0.4-0.6MP (clean water after dewatering, no oil, filtration, pressure stabilization), use flow rate is about 300L / min |
| 6 | Production efficiency | ≥100PCS/min |
| 7 | The product qualification rate | 99% (except for the original material and human operation) |
| 8 | Main accessories | Cylinder: AirTAC Screw guide rail: HIWIN / TBI PLC: Mitsubishi or Xinjie |
| 9 | Operating environment | General workshop environment is acceptable (no corrosive odor, no dust) |
Item | Material | Specification | Coil outer diameter | Coil inner diameter |
| 1 | Outer non-woven fabric | 200mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 2 | Inner layer non-woven fabric | 190mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 3 | Melt tape | 175mm wide roll material | Recommended less than 600mm | greater than 65mm |
| 4 | Nose bridge strip | 3.0mm wide roll material | Recommended less than 400mm | greater than 65mm |
| 5 | ear straps | 2.8mm round coil |
