Shenzhen HYPET Co., Ltd. |
Verified Suppliers
|
|
HDPE Pipe Single Screw Extruder Machine PE Pipe Extruder 55kw HYSJ60/38
HDPE Pipe Single Screw Extruder Machine HYPET Special features except the same features with other supplier.
HDPE Pipe Single Screw Extruder Machine Condition of use
1. HDPE Pipe Single Screw Extruder Machine Technical features of whole line
HDPE Pipe Single Screw Extruder Machine Specification | HDPE Pipe Single Screw Extruder Machine Description |
Suitable material | PE 100/PE80 |
Max. output | 220 kg/h |
Test and accept | Based on HYPET standard formula. |
Center height | 1,000mm |
Operation direction | From right to left |
Color of equipment | HYPET white color |
Control of whole production | Refer to the “configuration list”. |
Extrusion capacity will be changed according the processing material and working conditions |
2. HDPE Pipe Single Screw Extruder Machine Circumstances condition
SN | Condition | Specification | Description |
1 | Natural circumstance condition | Working place | Indoor use |
Power source | No dangerous area | ||
Humidity | 55%~85% no condensation | ||
Temperature | 0~40 ℃ | ||
2 | Electricity source | Installation capacity | 54 kW |
Power supply | 3P+N+PE | ||
Voltage/Frequency | 380V/50Hz, others can be option | ||
3 | Cooling water | Temperature | ≤5 ℃ |
Water pressure | ≥0.3MPa | ||
Flow | ~5 m3/h | ||
4 | Air condition | Compressor air pressure | ≥0.6MPa |
Flow | ~0.9 m3/min |
HDPE Pipe Single Screw Extruder Machine Main specification:
Parts name | Specification | Description |
Extruder | Extruder model | HYSJ-60/38 single screw |
Output | 220 kg/h | |
Screw | Diameter | Ø60mm |
Screw ID ratio | 38:1 | |
Finish | Nitrogen-filled (0.50~0.70mm depth) and polish | |
Max rotate speed | 107 r/min | |
Core of the screw | Auto control for temperature |
Barrel | Material | Bimetal barrel inside in two layers |
Heating control area | 6 areas | |
Heating way | Copper cooling fins with ceramic heater | |
Heating power | 15 kW | |
Cooling system | Low-noisy barrel cooling fan | |
Cooling power | 0.25kW x 6 sets |
Gear box | Gear surface | Hardened and ground in high precision |
Axis material | 40Cr | |
Driving motor | AC motor power | 55 kW |
AC inverter controller | Siemens brand |
HDPE Pipe Single Screw Extruder Machine Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.
3) This Price does not included commission and installation in buyer’s factory.