|
[China]
Trade Verify
Address: Xianke Building Bagua 4th Rd Shenzhen China
Contact name:Xiang
Shenzhen HYPET Co., Ltd. |
|
Verified Suppliers
|
|
|
PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder SJ 75/38
PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Configuration list
Note: This table as attached file which is for selection of the configuration on the extruder.
| Items | Choosing configuration |
| Production control system | PLC control system |
| Cooling system of the main control electric cabinet | Fan cooling for option |
| Main motor | AC motor with famous inverter |
| Pressure sensor | HYPET individual temperature and pressure control in two parts |
| Material of screw & barrel type | Nitro Alloy with bi-metal in two layers |
PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Condition of use
1. PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Technical features of whole line
| SN | Specification | Description |
| 1 | Suitable material | PE 100/PE80 |
| 2 | Suitable product | PE pipe production with NEW technology |
| 3 | Max. output | 500 kg/h |
| 4 | Test and accept | Based on HYPET standard formula. |
| 5 | Center height | 1,000mm |
| 6 | Color of equipment | HYPET white color |
| 7 | Control of whole production | Refer to the “configuration list”. |
| Note | Extrusion capacity will be changed according the processing material and working conditions | |
2. PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Circumstances condition
| SN | Condition | Specification | Description |
| 1 | Natural circumstance condition | Working place | Indoor use |
| Humidity | 55%~85% no condensation | ||
| Temperature | 0~40 ℃ | ||
| 2 | Electricity source | Installation capacity | 200 kW |
| 3 | Cooling water | Temperature | ≤5 ℃ |
| Water pressure | ≥0.3MPa | ||
| Flow | ~5 m3/h | ||
| 4 | Air condition | Compressor air pressure | ≥0.6MPa |
PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Main specification:
| SN | Parts name | Specification | Description |
| 1 | Extruder | Extruder model | HYSJ-75/38 single screw |
| Output | 500 kg/h | ||
| Center height | 1,000mm | ||
| Weight | 3.200kg | ||
| 2 | Electrical Control system | Detachable control panel | PLC |
| Components brand | Siemens, RKC, ABB, etc. | ||
| 3 | Screw | Diameter | Ø75mm |
| Screw ID ratio | 38:1 | ||
| Material | 38CrMoAlA + special alloy | ||
| Finish | Nitrogen-filled (0.50~0.70mm depth) and polish | ||
| Max rotate speed | 107 r/min |
| 4 | Barrel | Material | Bimetal barrel inside in two layers |
| Inside finish | Nitrogen-filled (0.50~0.70mm depth) | ||
| Heating control area | 7 areas | ||
| Heating way | Copper cooling fins with ceramic heater | ||
| Heating power | 20 kW | ||
| Cooling system | Low-noisy barrel cooling fan | ||
| Cooling power | 0.25kW x 7 sets |
| 5 | Gear box | Gear material | 20CrMnTi |
| Gear surface | Hardened and ground in high precision | ||
| 6 | Driving motor | AC motor power | 132 kW Siemens motor |
PPR Pipe Single Screw Extruder Machine / PPR Pipe Extruder Terms
& conditions
1. Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Provide technical consultation service on long-term basis.
2. Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2)This Price does not included commission and installation in buyer’s factory.
