|
[China]
Trade Verify
Address: Xianke Building Bagua 4th Rd Shenzhen China
Contact name:Xiang
Shenzhen HYPET Co., Ltd. |
|
Verified Suppliers
|
|
|
Single Screw Extruder Machine / HDPE Extruder Machine With Stable Output PLC Control System
Single Screw Extruder Machine / HDPE Extruder Machine Special features:
Single Screw Extruder Machine / HDPE Extruder Machine Specification
| SN | Parts name | Specification | Description |
| 1 | Extruder | Extruder model | HYSJ-80/38 single screw |
| Output | 550 kg/h | ||
| Center height | 1,100mm | ||
| Weight | 2,900kg | ||
| 2 | Electrical Control system | Detachable control panel | Siemens PLC |
| Components brand | Siemens, RKC, ABB, etc. | ||
| Features | 1. Cabinet is detachable, easy to install, maintain and transport; 2. With air conditioner; 3. Adopt the world famous brand electrical components, such as Siemens, ABB, RKC Schneider, and so on. | ||
| 3 | Screw | Diameter | Ø80 mm |
| Screw ID ratio | 38:1 | ||
| Material | 38CrMoAlA + special alloy | ||
| Finish | Nitrogen-filled (0.50~0.70mm depth) and polish | ||
| Max rotate speed | 150 r/min | ||
| Core of the screw | Auto control for temperature | ||
| Features | 1. German technology design, to ensure the highest output and good good plasticizing at the same power. 2. 38CrMoAlA nitriding HV900, depth 0.4-0.6mm surface sprayed alloy； | ||
| 4 | Barrel | Material | Bimetal barrel inside in two layers |
| Inside finish | Nitrogen-filled (0.50~0.70mm depth) | ||
| Heating control area | 8 areas | ||
| Heating way | Copper cooling fins with ceramic heater | ||
| Heating power | 28 kW | ||
| Cooling system | Low-noisy barrel cooling fan | ||
| Cooling power | 0.25kW x 8 sets | ||
| Features | 1. Inner casting alloy bimetal barrel； 2. With HYPET special feeding device, with large feeding quantity, good cooling, easy replacement, low maintenance costs. 3. Adopt ceramic heaters, high cost but fast heating, high temperature can be controlled | ||
5
| Gear box
| Housing material | Ductile iron QT-500 |
| Gear material | 20CrMnTi | ||
| Gear surface | Hardened and ground in high precision | ||
| Axis material | 40Cr | ||
| 6 | Driving motor | AC motor power | 160 kW |
| AC inverter controller | Siemens brand | ||
Single Screw Extruder Machine / HDPE Extruder Machine HYPET PE pipe single screw extruder Model list
| Model | 45/33 | 55/33 | 60/38 | 60/38 | 60/38 | 60/38 | 75/38 | 75/38 | 90/38 | 90/38 | 120/38 | 150/38 |
| Max output | 85 | 140 | 220 | 300 | 360 | 450 | 500 | 650 | 1000 | 1150 | 1450 | 1650 |
| Main motor | 22 | 37 | 55 | 75 | 90 | 110
| 132 | 160 | 250 | 280 | 355 | 400 |
Single Screw Extruder Machine / HDPE Extruder Machine Other terms
1. Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer according to the rule.
3) Training on field operation and maintenance for customer's personnel.
4) Provide technical consultation service on long-term basis.
2. Installation and debugging
When the machine arrives at site, the customer should install it on the appropriate position according to the specifications provided by the supplier; and then the supplier should send its engineers to the site if requirement approved,in order to instruct the customer about trial run and debugging. The customer should provide necessary conditions for trial run and provide materials for trial run, and should decide the processing conditions in trial run with consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before shipment at Seller's site. The Seller is obliged to test the performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and manpower for the commissioning of the order.
3) This Price does not included commission and installation in buyer’s factory.
3. Time of delivery
1) When the contract becomes valid, the machine should be delivered within 60 days since receipt of the advance payment. And the equipment will be in normal operation after debugging within two weeks after arrival.
2) During production, provided that the Buyer requests to modify the specification of the order, the Buyer shall notify the Seller of this modification in written form. Upon receipt of the notice, the Seller will quote to the Buyer the cost of this modification and notify the Buyer of any possible delay due to this modification.
4. Debugging charge
The buyer pays for the plane ticket of round-trip abroad and food and accommodation of buyer’s country during debugging. And the wage of technicians should be paid by the customer (100USD/day).
5. Guarantee clause
1) Guarantee is 1 year (excluding human factor and wearing parts).
2) Under proper working conditions, 12 months from the date of completion of commissioning at the buyer's site, and should be at the latest within 14 months from the issuing date of Bill of Lading.
