|
[China]
Trade Verify
Address: 65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Contact name:Bill, George, Michael
ROSCHEN GROUP |
|
Verified Suppliers
|
|
|
DTH HAMMERS
THE NEW RH560 ARRIVES WITH A BANG!
DRILLINGHEROES
The most premium hammer arrives to the market to meet the continued
demand for increased productivity through cutting edge solutions.
WHY RH560?
THE GREATEST PERFORMER YET
The mining industry continues to demand even higher levels of
productivity. Performance takes precedence thanks to reduced
handling and less downtime of the RH560 hammer.
UP TO 15 % INCREASE IN PENETRATION RATE
With its enhanced air cycle and piston design, the RH560 delivers
higher striking power leading to more power output. With less
inside parts this hammer provides outstanding reliability. We have
simply combined the reliability of our RH460 yet keeping the
simplicity of RH510. RH560 is here to stay.
GREAT START WITH SMOOTH COLLARING
With an ability to build up pressure gradually, the RH560 hammer
starts up smoothly allowing for better and quicker collaring in any
rock condition. Even in complex rock formations and against uneven
surfaces. Exact collaring and straight holes are prerequisites for
productive drilling with maximum advance, and lower overall costs.
This saves overall drilling time and reduced frustration for the
driller.
NO FOOT VALVE FOR TROUBLE-FREE PERFORMANCE
In almost any ground conditions RH560 will give you higher
productivity, improved reliability and better drilling economy
through less air consumption. Delivers the high impact and energy
transfer needed to keep you going on and on.
HIGHER POWER OUTPUT FOR THE SAME AIR CONSUMPTION
With a focus on optimized air cycle, the hammer improves
reliability and economy through cutting air consumption, increasing
power and improving lubrication. This allows for drilling bigger
sized holes at the same speed as a smaller hole with a standard
hammer, giving high productivity in variable ground conditions. Not
a patented piston.
FEATURE:
OPTIMIZED AIR CYCLE
VALUE ADDED
. Lower fuel consumption
. More responsive drilling
. Up to 15% higher penetration rate
. Less prone of breakage
BENEFIT:
. Low air consumption (15% less than before)
. Faster building up of air pressure
. Higher frequency means more impact/minute
. Increased power output
RH560 A BIG HAMMER WITH BIGGER ADVANTAGES:
. Simple overall design minimizes failures
. Optimized, piston and bit design maximizes energy transfer
efficiency
. Higher penetration rate up to 15%
. Low air consumption meaning less fuel consumption yet more power
. No foot valve meaning no small parts causing unnecessary
breakdown
. Less downtime means less handling of the hammer, lower injury
risk
| TECHNICAL SPECIFICATIONS | |||||||||
| Complete hammer | Part No. | ||||||||
| 3 1/2" API Reg Pin | 32-5665-GQA-04C | ||||||||
| #28 Cubex Pin | 32-5665-GQA-56C | ||||||||
| Air Consumption, CFM | Air Consumption, M3/Min, Din 1343 | ||||||||
| 150 psi | 250 psi | 350 psi | 10 bar | 18 bar | 24 bar | ||||
| 310 | 629 | 847 | 8.8 | 17.8 | 24 | ||||
| Weight | Outside diameter | Hammer length | Hammer length with bit | ||||||
| Bit closed | Bit extended | ||||||||
| kg | lb | mm | inch | mm | inch | mm | inch | mm | inch |
| 117 | 257.9 | 150 | 5.9 | 1,158 | 45.6 | 1,266 | 49.8 | 1,307 | 51.5 |
| ROSCHEN Model | Model | Size | Weight lb. | Outside diameter | Length | OP pressure psi |
| ROS 52 | RH460g | 5" | 170 | 496" | 42.01" | 150-350 |
| ROS 32 | RH550r | 3" | 55 | 3.2" | 32.4" | 150-350 |
| ROS 42 | RH550r | 4" | 83 | 3.86" | 36.0" | 150-350 |
| ROS 54 | RH550 | 5" | 145 | 4.72" | 38.86" | 150-350 |
| ROS 54 | RH550g | 5" | 160 | 5.0" | 38.86" | 150-350 |
| ROS 64 | RH550r | 5" | 160 | 5.0" | 38.86" | 150-350 |
| ROS 64 | RH550w | 6" | 158 | 5.6" | 36.3" | 150-350 |
| ROS 64 | RH550 | 6" | 158 | 5.6" | 36.3" | 150-350 |
| ROS 64 | RH550g | 6" | 180 | 5.9" | 36.3" | 150-350 |
| ROS 64 | RH550r | 6" | 180 | 5.9" | 36.3" | 150-350 |
| ROS 84 | RH550r | 8" | 380 | 7.12" | 48.0" | 150-350 |
| ROS 84 | RH550w | 8" | 380 | 7.12" | 50.0" | 150-350 |
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
