|
[China]
Trade Verify
Address: 65 EAST XINHUAN ROAD, SHANGHAI, CHINA
Contact name:Bill, George, Michael
ROSCHEN GROUP |
|
Verified Suppliers
|
|
|
Hydraulic Top Hammer Drilling Jumbo Used Underground Mining
Projects
Hydraulic Top Hammer Drilling Jumbo
Model: RS-111 Drilling jumbo
Drilling jumbos are usually used in underground mining, if mining
is done by drilling and blasting. They are also used in tunneling,
if rock hardness prevents use of tunneling machines.
A drilling jumbo consists of one, two or three rock drill
carriages, sometimes a platform, which the miner stands on to load
the holes with explosives, clear the face of the tunnel or else.
The carriages are bolted onto the chassis, which supports also the
miners cabin and of course the engine. Modern drilling jumbos are
relatively large, there are however smaller ones for use in cramped
conditions. Whereas modern jumbos usually fitted with rubber tyres
and diesel powered, there are also exist variants with steel
wheels, to ride on rails and even single carriage sled-mounted
ones. Electric power is also common, historical jumbos were powered
by compressed air. Electricity and compressed air produce of course
no exhaust gases, which is preferable if work is done in smaller
tunnels where good ventilation is difficult.
Features:
1. The RS-111 is a hydraulic top hammer drilling rig designed for a
12-35 m2 cross section for use in underground mining projects.
2. Robust universal drilling boom creates ideal face drilling
coverage. Automatic parallelism and 360 roll over enable easy, fast
and accurate positioning for face drilling. Sideaways drilling and
bolt hole drilling.
3. The configuration of components allows for the operator to have
a clear view when drilling and traveling. A powerful and well
balanced 4 wheel drive chassis lets the tunneling drilling rig move
through limited space and tough terrain in the mines. A dual
circuit service brake and enclosed multi-disc parking/emergency
brake ensure safety in tramming and on sloped terrain.
4. Field proven high frequency hydraulic drifter delivers high
performance. A trapezoidal percussion piston optimized shock wave
transfer efficiency, so the drill can penetrate deeper while
decreasing cost of replacement parts.
5. The operator cab is safe and comfortable. Many automatic
features simplify drilling control so miners can focus on fast and
accurate drilling.
6. All service points of the hydraulic drifting jumbo are easily
accessible, simplifying routine maintenance.
Technical Parameters Specifications:
| Length | 11300mm | |
| Width | 1750mm | |
| Height | 2000/3000mm | |
| Walking Speed, Horizontal | 10 km/h | |
| Grade Ability | 0.25 | |
| Protection | ||
| Noise Level | <100 dB(A) | |
| Adjustable Safety Canopy | POPS + ROPS | |
| Drilling System | ||
| Drifter | 1xHC50/R38 | 1xHC109/R38 |
| Weight | 112 kg | 151 kg |
| Percussion Power | 13 kW | 18.8 kW |
| Percussion Flow | 105 L/min | 135 L/min |
| Percussion Power | 130 bar | 135 bar |
| Rotation Pressure | 150 bar | 150 bar |
| Frequency | 62 Hz | 47 Hz |
| Rotation Torque | 325 Nm | 780 Nm |
| Hole Dia. | 32-89mm | 45-102mm |
| Rod Size | R38-H35-R32 | |
| Feed Roll Over | 360o | |
| Pushing Length | 3450mm | |
| Feed Stroke | 1600mm | |
| Elevation Angle | 90o | |
| Blow Angle | 90o | |
| Swing Angle | Left 45o Right 45o | |
| Boom | ||
| Model | K26F | |
| Type | Automatic Parallelism | |
| Boom Extension | 1200mm | |
| Elevation Angle | 45o | |
| Blow Angle | 16o | |
| Swing Angle | Left 45o Right 45o | |
| Electric Hydraulic Power Station | ||
| Motor Power | 45 kW/55 kW AC three phase | |
| Percussion + feed + boom | Variable piston pump | |
| Rotation | Gear pump | |
| Filtration | 10ɥ | |
| Hydraulic Tank | 240L | |
| Hydraulic Oil Cooler | Water cooler | |
| Voltage | 380V | |
| Frequency | 50Hz | |
| Start | △-Y | |
| Cable Reel | 1xK440 | |
| Cable Length | 100m / 80m | |
| Cable Size | ɸ28mm/ɸ32mm | |
| Cable Type | 3x35+3G6+2x1.5 | |
| 3x50+3G6+2x1.5 | ||
| Water and Air System | ||
| Compressor | 1xJN5 | |
| Output | 0.5m3/min | |
| Pressure | 5-7 bar | |
| Shank lubrication | Oil mist | |
| Shank lubrication Air Consumption | 0.3m3/min | |
| Shank lubrication Oil Consumption | 180-250g/h | |
| Flushing Pump | 1xCR3 | |
| Power | 1.5 kW | |
| Output | 3m3/h | |
| Under Carriage | ||
| Diesel Engine | Deutz BF4L2011 53 kW, 2800rpm | |
| Tail Gas Clean-up | Exhaust catalysts | |
| Drive System | 4-wheel drive | |
| Oscillation | Rear axle ±10o | |
| Tire | 11.00-20 | |
| Steering | ±40o articulation | |
| Service Brake | Duo-Circuit disc brakes | |
| Parking/Emergency | Multi-disc on trans | |
| Fuel Tank | 60L |
For more information please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.net ; http://www.roschen.cn
http://www.roschen.com ; http://www.roschengroup.com
