|
[China]
Trade Verify
Address: Economic and Technical Development Zone, Ningguo City, Anhui Province, China
Contact name:LIU
ANHUI YACHEN WEAR-RESISTANT MATERIAL CO., LTD. |
|
Verified Suppliers
|
|
|
Product Specifiions:
Excavator Parts-Excavator bucket teeth, tooth holders (Komatsu bucket teeth, Carter bucket teeth, Daewoo Doosan bucket teeth, Kobelco bucket teeth, Hyundai bucket teeth, bucket teeth, V series bucket teeth, Hitachi bucket teeth, Yuchai bucket teeth, Shangong bucket teeth, Liugong bucket teeth, etc.) and loader bucket teeth accessories: (Shangong 50 bucket teeth, Liugong bucket teeth, Xiagong bucket teeth, Lingong bucket teeth, Chengong bucket teeth, Changgong bucket teeth, Degong bucket teeth, etc.).
With the principle of "Good quality, best services, reasonable
prices", we sincerely look forward to establishing stable,
long-term and strategically cooperative partnerships with old and
new customers from all over the world for our bright future, mutual
cooperation. Let us promote each other and create a new and happy
tomorrow hand in hand.
Welcome to contact us to know more! We believe we will be your best partner and choice.
| Chemical Composition & Mechanical Properties | |||||||
| No | Material No | Product | Impact Toughness (ak/JC m2) | Hardness HRC | Tensile Strength | Elongation | Working Condition |
| 1 | 1# | Adapter,side cutter, protect panel etc. | >= 15 | 40~46 | >= 1300 | >= 4 | Normal temperature |
| 2 | 2# | Teeth/Loader teeth | >= 13 | 48~52 | >= 1500 | >= 4 | |
| 3 | 3# | Adapter(>40tons machine) High Quality | >= 20 | 40~46 | >= 1350 | >= 5 | |
| 4 | 5# | Teeth (>20 tons machine) high quality | 15~25 | 50-54 | >=1550 | >= 5 | |
| NO | Description | Part No. | Model | Weight |
| 1 | BUCKET TOOTH | 205-70-19570RC | EX120/EX200/EX210 | 5.5 |
| 2 | BUCKET TOOTH | 207-70-14151RC | EX240/EX290 PC330/PC360 | 9.2 |
| 3 | BUCKET TOOTH | 208-70-14270RC | PC400 | 14.4 |
| 4 | BUCKET TOOTH | 208-70-14270TL | PC400 | 12.5 |
| 5 | BUCKET TOOTH | 208-70-14270RC | PC400 | 19.1 |
| 6 | BUCKET TOOTH | 2713Y1217RC | DH225/S225 | 6.37 |
| 7 | BUCKET TOOTH | 2713Y1219RC | DY300/S400/S450/S470 | 7.6 |
| 8 | BUCKET TOOTH | 271300032RC | Hitachi ZAX360-5G/SANY365 | 11.8 |
| 9 | BUCKET TOOTH | 271300032TL | Hitachi ZAX360-5G/SANY365 | 9.5 |
| 10 | BUCKET TOOTH | 1U3352RC | E320/E312/E322 | 7 |
| 11 | BUCKET TOOTH | 7T3402RC | E325/E307 | 10 |
| 12 | BUCKET TOOTH | 9W8452RC | E330 | 13.67 |
| 13 | BUCKET TOOTH | 9W8452TL | E330 | 10.8 |
| 14 | BUCKET TOOTH | 1U3552RC | E345 | 20.5 |
| 15 | BUCKET TOOTH | 14530544RC | V210/V214 | 6.62 |
| 16 | BUCKET TOOTH | 14553243RC | V360/V460 | 16 |
| 17 | BUCKET TOOTH | 14553243TL | V360/V460 | 14.5 |
| 18 | BUCKET TOOTH | SK200RC | SK200 | 5.5 |
| 20 | BUCKET TOOTH | E161-31310RC | R225-9 | 6.55 |
1 .WAX INJECTION:for Hitachi excavator bucket teeth Wax design of
the desired castings are produced by injection molding.These
designs are called patterns.
2 .ASSEMBLY:The patterns are attached to a central wax stick,called
a sprue,to form a casting cluster or assembly.
3 .SHELL BUILDING:The shell is built by immersing the assembly in a
liquid ceramic slurry and then into a bed of extremely fine sand.Up
to eight layers may be applied in this manner.
4 .DEMAX:Once the ceramic is dry,the wax is melted out,creating a
negative impression of the assembly within the shell.
5 .CONVENTIONAL CASTING:In the conventional process,the shell is
filled with molten metal by gravity pouring.As the metal cools, the
parts and gates,spure and pouring cup become one solid casting.
6 .KNOCKOUT:When the metal has cooled and solidified,the ceramic
shell is broken off by vibration or knock-out machine.
7 .CUT OFF: The parts are cut away from the central spure using a
high speed friction saw.
8 .CLEANING AND GRINDING: When the fomred casting parts are
finished, they will be cleaned by hand work totally.After that, all
the parts will be put in to the grinding machine for spot blasting.
After these operations, the metal castings becomes identical to the
original wax patterns.
9 .HEATTREATMENT: Once the parts for Hitachi excavator bucket teeth
are finished by cleaning, they will be put in to heattreatment
machine , in order to get a good harness and anti-wearness,as well
as good impact performance.
10 .PAINTING: Sprat painting method is used to paint the parts with
different colors. Then they will be given special time for dry, so
that they can be kept as shining and smooth.
11 .PACKAGE: Man-made wooden carton is used for package,which is no
need for fumigation.
12 .SHIPPMENT: When all these work is done, finished products for
Hitachi excavator bucket teeth is ready to ship to every cornor of
the world.
