Shanghai Puyi Industrial Co., Ltd. |
Verified Suppliers
|
|
Dumper Rubber Tracks 700X125X78 for MITSUBISHI LD700 and CAT LD700
1. Application :Dumper Machine
Before purchasing,please confirm the size with our seller,better with your machine brand and model
If you want customized the rubber tracks,please tell us the overall length and width
MODEL | ORIGINAL SIZE | REPLACE SIZE | ROLLER |
LD700 (CAT) | 700X125X78 | ||
LD700(MITSUBISHI) | 700X125X78 | 700X125X78 | A2 |
2. Notice on using
The rubber track should be frequently maintained and cleaned after
excessive use of sediment and chemicals. Otherwise it will
accelerate the rubber track wear and corrosion.
In summary, as long as the user care about the rubber tracks, the
crawler life will be extended accordingly.Adjust the tension of the
rubber crawler so that the height, the variable range is 10-20mm
when the machine is lifted. Readjust when the tension decreases.
(Be careful because the rubber crawler may come off if the tension
is too low).Avoid projection from the frame around the rubber
crawler, especially on its inner circumference. (Rubber crawlers
are easily deformed; If it comes into contact with the frame, an
accident such the rubber being cut can occur). Avoid sharp
projections when traveling. Avoid turning too fast on concrete
roads with a high coefficient of frction because this can cause
accidents such as cutting the rubber.Be careful that no oil, etc
adheres to the rubber track. If it does, wipe it off immediately.
When storing for long periods, keep indoors, away from direct
sunshine and rain.
Replace as soon as possible when abrasion of sprockets is observed
3. Future of rubber track:
1. Rubber tracks cause less damage to roads than steel tracks, and
less rutting on soft ground than steel tracks .
2. A benefit to equipment operating in congested areas, rubber
tracks make less noise than steel tracks .
3. Rubber tracks permit machines to travel at a higher speed than
steel tracks .
4. Rubber tracks insulated machine and operator from vibraion,
extedin the service life of machine and decreasing operator's
fatigue.
5. The ground pressure of rubbr tracks equipped machinery can be
fairly low, about 0.14-2.30 kg/m2, a major reason for its use on
wet and soft terrain.
6. The added traction of rubber tracked vehicles permits them to
pull twice the load of wheeled vehicles of the same weight.
7. Rubber tracks' pulling performance being twice that of wheels,
it permits the lighter vehicles equip with rubber track to do the
same pulling work than that of wheeled vehicles.
3. Notice on using
The rubber track should be frequently maintained and cleaned after
excessive use of sediment and chemicals. Otherwise it will
accelerate the rubber track wear and corrosion.
In summary, as long as the user care about the rubber tracks, the
crawler life will be extended accordingly.Adjust the tension of the
rubber crawler so that the height, the variable range is 10-20mm
when the machine is lifted. Readjust when the tension decreases.
(Be careful because the rubber crawler may come off if the tension
is too low).Avoid projection from the frame around the rubber
crawler, especially on its inner circumference. (Rubber crawlers
are easily deformed; If it comes into contact with the frame, an
accident such the rubber being cut can occur). Avoid sharp
projections when traveling. Avoid turning too fast on concrete
roads with a high coefficient of frction because this can cause
accidents such as cutting the rubber.Be careful that no oil, etc
adheres to the rubber track. If it does, wipe it off immediately.
When storing for long periods, keep indoors, away from direct
sunshine and rain.
Replace as soon as possible when abrasion of sprockets is observed
4. Packaging & Delivery
Packing: Bare package or Pallet
Delivery time: 15days for 2 PCS