Guangzhou XinFeng Engineering Machinery Co., Ltd. |
Verified Suppliers
|
|
Parts for your MINI HYD EXCAVATOR:
Product Descriptio
Pos. | Part No | Qty | Parts name | Comments |
1 | 333-7838 | [1] | ROTATING GP-PUMP (BASIC) | |
333-7847 | [1] | PLATE-VALVE | ||
2 | 189-4720 | [1] | SEAL-SHAFT | |
3 | 373-8464 | [1] | SWASHPLATE | |
4 | 3J-7354 | [1] | SEAL-O-RING | |
5 | 333-7842 | [1] | SHAFT-DRIVE | |
6 | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
7 | 333-7843 | [1] | SPRING | |
8 | 189-4716 | [1] | SHIM (2.5-MM THK) | |
9 | 487-7812 | [1] | RING-STOP | |
10 | 203-8609 | [1] | CUP-BEARING | |
11 | 105-3035 | [1] | CONE-BEARING | |
12 | 333-7846 | [1] | BEARING-CRADLE (RH) | |
13 | 333-7845 | [1] | BEARING-CRADLE (LH) | |
14 | 204-3334 | [1] | SEAL-O-RING | |
15 | 6R-7943 M | [2] | SCREW (M5X0.8X15-MM) | |
16 | 333-7850 | [1] | BEARING-TAPERED ROLLER | |
17 | 8T-9597 | [1] | RING-RETAINING | |
18 | 6V-8337 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
19 | 9S-8005 | [3] | PLUG (3/4-16-THD) | |
20 | 3K-0360 | [3] | SEAL-O-RING | |
21 | 8T-8442 M | [4] | BOLT-SOCKET HEAD (M6X1X30-MM) | |
22 | 112-4640 | [1] | PIN | |
23 | 379-5187 | [1] | SPRING | |
24 | 333-7840 | [1] | STOP | |
25 | 398-7457 Y | [1] | VALVE GP-PUMP CONTROL (FLOW COMPENSATOR) | |
26 | 280-7870 | [1] | GASKET | |
27 | 341-7630 | [1] | VALVE-PUMP CONTROL (FLOW COMPENSATOR) | |
28 | 544-0478 | [1] | PISTON-CONTROL | |
29 | 446-5379 | [2] | SEAL-O-RING | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
Hydraulic pump | Cylinder block | Press pin | Valve plate | Barrel washer |
Piston motor | Piston shoe | Snap ring | Shoe plate | Oil seal |
Piston pump | Retainer plate | Coil spring | Bearing plate | Frication plate |
Gear pump | Ball guide | Disk spring | Swash plate | Steel plate |
K3V SERIES | K3V63S | K3V63DT | K3V63DTP | ||
K3V112S | K3V112DT | K3V112DTP | |||
K3V140S | K3V140DT
| K3V140DTP | K3V140DTH | ||
K3V180S | K3V180SH | K3V180DT | K3V180DTP | K3V180DTH | |
K3V280SH | K3V280DT | K3V280DTH | |||
K5V SERIES | K5V80S | K5V80DT | K5V80DTP | ||
K5V140S | K5V140DT | K5V140DTP | |||
K5V160S | K5V160SH | K5V160DT | K5V160DTP | K5V160DTH | |
K5V200S | K5V200SH | K5V200DT | K5V200DTP | K5V200DTH | |
A SERIES | AP2D12 | AP2D14 | AP2D18 | AP2D21 | AP2D25 |
AP2D36 | A10VD43 | A10VD17 | AP2D28 | A10VO63 | |
A10VO71 | A10VO95 | ||||
OTHERS | PSVD2-13E | PSVD2-17E | PSVD2-18E | PSVD2-19E | PSVD2-21E |
PSVD2-26E | PSVD2-27E | PSVD2-42 | PSVL-42CG | PSVL-36CG | |
HPV102 | HPV118 | HPV145 | HPV116 | HPV050 | |
HPK055 | HPK060 | ||||
PVC90 | PVC-80 | K3SP36C | K3SP36B | K3VL80 |
We can supply you all kinds of excavator spare parts as following:
1.Hydraulic parts: hydraulic pump, main control valve, hydraulic cylinder, final drive, travel motor, swingmotor,gear box, slewing bearing etc.
2.Engine parts: engine assy, piston, piston ring, cylinder block, cylinder head
crankshaft, turbocharger,fuel injection pump, starting motor and alternator etc.
3.Undercarriage parts: Track roller, Carrier roller, Track Link, Track shoe, Sprocket, Idler and Idler cushion,coil adjuster,rubber track and pad etc.
4.Cab parts: operator’s cab assy, wiring harness, monitor, controller, seat, door etc.
Maintenance
The excavator is a heavy-duty construction machinery, and regular maintenance and upkeep is very important to extend its service life and ensure its normal operation. The following are some common excavator maintenance matters:
1. Cleaning: Regularly clean the external and internal components
of the excavator, including the body, engine, hydraulic system,
etc. Remove dust, mud and other debris to ensure a clean machine
surface.
2. Lubrication: Each key component of the excavator requires proper
lubrication to reduce wear. Check to ensure adequacy of oil and
grease and lubricate according to manufacturer's recommendations.
3. Hydraulic system: The hydraulic system of the excavator is an
important working part of it. Regularly check the quality and level
of hydraulic oil and replace the oil that needs to be replaced.
Make sure there are no leaks in the hydraulic lines and check the
working status of the hydraulic cylinder.
4. Engine: Regularly check the working status of the engine,
including fuel, coolant, oil, etc. Replace dirty filters and ensure
proper engine operation.
5. Tires and tracks: Check the wear of tires or tracks. If
replacement is needed, replace it promptly to ensure good traction
and stability.
About Xinfeng Machinery (XF) parts:
Advantages
Warehouse Display
Packaging and Delivery
FAQ
1. How to quickly and accurately buy products what lneeded?
A: Provide the original parts number to us to check.
2. How long have you been in the excavator
A: We are engaged in excavator parts since 1998
3. lfI don't know the part number,what shouldI do?
A: Please send us size and pictures of old products.
4. What is the warranty of the products?
A: The warranty is 6/12 Months based on the specific product.
5. How long is your delivery time?
A: The normal delivery time is 3-5 days for stock sproductsafter
getting payment. lf not in stock, we will inform you thetime
requlred.
6. Which shipping term you can supply?
7. What is your MOQ?
A: Small order and sample order are acceptable
8. Do you have any After-Sales service?
A: Yes!Our