Home Companies Sinuo Testing Equipment Co. , Limited

UL2580 EV Lithium Battery Cells Low Pressure Altitude Simulation Testing Equipment

Sinuo Testing Equipment Co. , Limited

Contact Us

[China] country

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Inquir Now

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

UL2580 EV Lithium Battery Cells Low Pressure Altitude Simulation Testing Equipment

Country/Region china
City & Province guangzhou guangdong
Categories Analyzers
InquireNow

Product Details

  

 

UL2580 EV Lithium Battery Cells Low Pressure Altitude Simulation Testing Equipment

 

Complied Standards & Clauses


UL 2580:2020 STANDARD FOR SAFETY Batteries for Use In Electric Vehicles Annex D3.9

 

IEC 62133-2012 clause7.3.7

 

UL 1642,UN38.3

 

Equipment Overview


Samples and Restrictions: New energy lithium battery, electronic products, aerospace, shipbuilding, military industry, auto parts, etc.

 

Application: The high-altitude and low-pressure test box of lithium batteries is designed according to UL, EN, IEC and other standard test requirements. It can reach the low-pressure storage state of the sample in a short time. It can automatically control the test cycle, monitor the pressure change in the box throughout the process, and realize the automatic termination of the test. The simulated battery and battery pack are stored for 6 hours at a pressure equal to or lower than 11.6kPa and an ambient temperature of (20±5) °C. If the battery has no leakage, no exhaust, no disassembly, no rupture, and no fire, and the open circuit voltage of each test cell or battery pack after the test is not less than 90% of its voltage before the simulation test, that is, it is qualified.

 

Structure:  One machine structure, the door uses explosion-proof lock + explosion-proof chain

 

Use Environment: 

Power supply: AC220V±10%/50Hz 2KW,environment temperature: 5℃~+35℃,,relative humidity:≦85%RH There should be no high concentration dust, corrosive gas and flammable and explosive atmosphere.

 

Technical Parameters


Control and OperationPLC and touch screen intelligent control system with remote control device
Cabinet specifications

Inner chamber WDH= 600×600×600mm,Reinforced steel + stainless steel(thickness 10.0mm)

Outer chamber WDH=940×780×1620mm,A3 cold rolled steel plate baking varnish,thickness 1.5mm

View window WH= 390 X 360mm (20mmThick tempered explosion-proof glass)

Timing time99H 59M 59S
Air PressureAtmospheric ~5Kpa(adjustable)
UnitKpa
USB InterfaceWith USB interface, test data can be exported
OptionVideo surveillance system, terminal device
  

Hot Products

IEC 62196-1 Electric Vehicle Charging Interface Mechanical Load Test Device Complied Standards & ...
IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment ...
IEC 60390 Electric Vehicle Charging Plug And Socket Cable Flexing Test Apparatus Complied Standards ...
IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment Complied Standards & ...
IEC62196 Electric Vehicle Plugs And Connectors Steel Ball Impact Device Complied Standards & Clauses ...
IEC 62196 Electric Vehicle Connector And Plug Universal Material Tensile Machine Complied Standards ...