Home Companies Sinuo Testing Equipment Co. , Limited

IPX1 IPX2 Water Ingress Testing Equipment Vertical Rain Drip Box IEC 60529

Sinuo Testing Equipment Co. , Limited

Contact Us

[China] country

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Inquir Now

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IPX1 IPX2 Water Ingress Testing Equipment Vertical Rain Drip Box IEC 60529

Country/Region china
City & Province guangzhou guangdong
Categories Optical Instruments
InquireNow

Product Details

 
 

IEC 60529 IPX1 IPX2 Vertical Rain Drip Box Water Ingress Test Chamber
 
Complied Standards & Clauses


 
IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX1 and IPX2.
 
Equipment Overview


Structure: The device is composed of a drip mechanism and an electric control cabinet. The drip box is fixed to the top of the chamber. There is a turntable, has a rotation speed of 1r/min, used for IPX1 test; With 15° sample support block, used for IPX2 test; the height of the turntable can be adjusted manually, matching the distance 200mm from the needle to the sample. The test equipment is equipped with a water filter cleaning device to prevent pinhole blockage. This whole system adopts chamber structure.
 
Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, communication products, household appliances, outdoor lighting and signal devices, etc
 
Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water dripping at degree IPX1 and IPX2.
 
Principle: Ensure that the dripping speed reaches the standard required value by controlling the water supply flow, the test equipment can produce a uniform flow of water drops over the whole area of the enclosure.
 
Use Environment: Power supply: AC380V±5%/50Hz, 3KVA, or match client’s local power supply requirements.
Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.
Water source: clean water or tap water without impurities, equipped with water cleaning filter.
 
Technical Parameters


Control & OperationPLC and touch screen intelligent control system
Chamber Size

Inner: WDH=800×800mm×800mm
outer: WDH=1280×900mm×1750mm
Can be customized according to client's requirements

Drip AreaWD=600×600mm, other sizes can be customized
Drip Height200mm distance of the needle to the sample is achieved by adjusting the height of the turntable or raising the specimen

Drip Speed
(Water Flow)

1+0.5 0mm/min or 3+0.5 0mm/min adjustable
Needle Pinhole ApertureΦ0.4mm
Drip Hole Spacing20mmx20mm
TurntableDiameter: Φ400mm, rotation speed:1-5r/min, with a 15° sample support block and a lifting bracket, bearing capacity ≤20kg
Drip Box PositionLocated at the top of the inner chamber, fixed
Test Time0-99.9min, can be preset
Chamber MaterialInner chamber adopts SUS304 stainless steel
Water Circulatory SystemThere is a clean filter device at the water inlet, and the drip water is automatically collected into the storage tank through the chassis and can be recycled.
Safety ProtectionPhase sequence protection, leakage protection, water shortage protection, abnormal protection
 
Details:

Hot Products

IEC 62196-1 Electric Vehicle Charging Interface Mechanical Load Test Device Complied Standards & ...
IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment ...
IEC 60390 Electric Vehicle Charging Plug And Socket Cable Flexing Test Apparatus Complied Standards ...
IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment Complied Standards & ...
IEC62196 Electric Vehicle Plugs And Connectors Steel Ball Impact Device Complied Standards & Clauses ...
IEC 62196 Electric Vehicle Connector And Plug Universal Material Tensile Machine Complied Standards ...