Home Companies Sinuo Testing Equipment Co. , Limited

IPX3 IPX6 IP Test Equipment Spray Nozzles Rain Spray Testing Apparatus

Contact Us

[China]

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IPX3 IPX6 IP Test Equipment Spray Nozzles Rain Spray Testing Apparatus

Country/Region china
City & Province guangzhou guangdong
Categories Analyzers

Product Details

 

 

IEC 60529 IPX3/4/5/6 Spray Nozzle Hose Nozzles IP Code Test Equipment

 

Complied Standards & Clauses


 

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX3, IPX4, IPX5 & IPX6.

 

Equipment Overview


Use Environment:

Power supply: AC380V±5%/50Hz, 5KVA, or match client’s local power supply requirements.

Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities.

 

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, household appliances, communication products, outdoor lighting and signal devices, etc.

 

Structure: The test equipment consists of a hand-held spray nozzle, a hose nozzle, a support, water storage tank an electrical control cabinet and a turntable. The nozzles are fixed on the support, the sample is placed on the turntable, the turntable has a rotation speed of 1r/min and its rotation is driven by motor, to make the enclosure of the specimen to be splashed in all directions or sprayed from all practicable directions. The water storage tank and electrical control part are interaged. This whole system adopts open type structure.

 

Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 & IPX4 and water jets at degree IPX5 and IPX6.

 

Principle: Ensure that the water spray and water jet speed reach the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions or sprayed from all practicable directions.

 

Technical Parameters


IPX3 & IPX4 Spray Nozzle
Parameters of Spray NozzleOuter diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch , total 121 holes of Ф0.5mm, made of brass.
Water Flow10L/min±5%, flow meter is adjustable through rotameter, electronic flowmeter is optional
Pressure50~150Kpa, the pressure gauge measuring range: 0~0.25Mpa
Moving ShieldMade of aluminum, can be detachable
Water Spray DirectionsThe angle of water spraying can be adjusted
IPX5 & IPX6 Hose Nozzle
Parameters of Hose NozzleIPX5: Ф6.3mm; IPX6: Ф12.5mm
Delivery RateIPX5: 12.5±0.625L/min; IPX6: 100±5 L/min, flow meter is adjustable through rotameter, electronic flowmeter is optional
Distance from Nozzle to Enclosure Surface2.8m ((The distance from the nozzle to the center surface of the turntable, standard requires 2.5-3m)
Water Jet DirectionsThe angle of water jetting can be adjusted
General 
Control & OperationPLC and touch screen intelligent control
Nozzle Fixed MethodSpray nozzle and hose nozzles are fixed on the support
Pressure Gauge0~0.25MPa, can be displayed
Test Duration0.01S~99.9 min, can be preset
TurntableDiameter: Φ600mm, rotation speed: 1r/min, bearing capacity: ≤50kgs
Water Storage TankThis test system adopts open type structure, the test water is not recycled. The test system is equipped with an approximately 500L stainless steel water storage tank. The water storage tank is equipped with a water level float valve to automatically control the water inlet, and has high and low water level alarm detection, to effectively prevent the pump from being damaged due to dry water. The water storage tank and electrical control part are integrated.
Safety ProtectionPhase sequence protection, leakage protection, water shortage protection, abnormal protection.

 

 

Hot Products

IEC 60529 IPX7 Temporary Immersion Water Ingress Testing Equipment Complied Standards & Clauses ...
IEC 60529 IPX8 Continuous Immersion Water Ingress Testing Equipment Complied Standards & Clauses ...
IEC 60529 IPX3/4/5/6 Spray Nozzle Hose Nozzles IP Code Test Equipment Complied Standards & Clauses ...
IPX3 IPX4 Oscillating Tube Rain Moisture Testing Equipment Complied Standards & Clauses IEC60529...
IEC 60529 IPX1 to IPX7 Comprehensive Water Ingress Testing Equipment Complied Standards & Clauses ...
IEC 60529 IPX1~4 Vertical Rain Drip and Oscillating Tube Testing Equipment Complied Standards & ...