Home Companies Sinuo Testing Equipment Co. , Limited

IEC 60529 Water Ingress Testing Equipment IPX1 IPX4 Vertical Rain Drip Oscillating Tube

Sinuo Testing Equipment Co. , Limited

Contact Us

[China] country

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Inquir Now

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

IEC 60529 Water Ingress Testing Equipment IPX1 IPX4 Vertical Rain Drip Oscillating Tube

Country/Region china
City & Province guangzhou guangdong
Categories Level Measuring Instruments
InquireNow

Product Details

 

 

IEC 60529 IPX1~4 Vertical Rain Drip and Oscillating Tube Testing Equipment

 

Complied Standards & Clauses


 

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IPX1, IPX2, IPX3 & IPX4.

 

Equipment Overview


Application: To verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water dripping at degree IPX1 & IPX2 and water spraying and splashing at degree IPX3 & IPX4.

 

Samples and Restrictions: Electrical and electronic products, automobiles, motorcycle parts, household appliances, communication products, outdoor lighting and signal devices, etc.

 

Structure: The test equipment consists of a drip mechanism, an oscillating mechanism, an electrical control cabinet and a turntable. The bracket of drip box is wall-hanging and with anti-drop function, which can lift automatically controlled by motor. One end of the oscillating mechanism is mounted on the wall, and the other end of the oscillating mechanism is fixed on the floor support, the tube is caused to oscillate by motor driving. The turntable has a rotation speed of 1r/min, used for IPX1 ~IPX4 test; the turntable can be tilted 15°, used for IPX2 test. The test equipment is equipped with a water filter cleaning device to prevent pinhole blockage. This whole system adopts open type structure.

 

Principle: Ensure that the dripping speed or spraying speed reaches the standard required value by controlling the water supply flow, the test equipment can produce a uniform flow of water drops over the whole area of the enclosure (IPX1 and IPX2) or make the enclosure of the specimen to be splashed in all directions (IPX3 and IPX4).

 

Use Environment:

Power supply: AC380V±5%/50Hz, 15KVA, or match client’s local power supply requirements.

Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860 mbar -1060 mbar), there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities, equipped with water cleaning filter.

 

Technical Parameters


IPX1 & IPX2
Drip AreaWD=1000×1000mm, other sizes can be customized
Drip Height200mm distance of the needle to the sample is automatically measured by infrared sensor
Drip Speed / Water Flow1+0.5 0mm/min or 3+0.5 0mm/min switchable, rainfall is digitally controlled
Needle Pinhole ApertureΦ0.4mm
Drip Hole Spacing20mm×20mm
Drip Box LiftingDriven by motor, adjustable from 1100-1800mm, screw guide ensures smooth lifting and self-locking
 
IPX3 & IPX4
Oscillating TubeR200, R400, R600, R800, R1000, R1200, R1400, R1600mm are optional, made of stainless steel
Needle Pinhole ApertureΦ0.4mm
Spray Holes Distribution

IPX3:over an arc of 60° either side of the center point (120°)

IPX4:over the whole 180° of the semicircle

Hole spacing: 50mm

IPX3/4 SwitchingSwitching by changing a certain number of blind hole needles or through-hole needles
Oscillating AngleIPX3:120°(±60°); IPX4:350°(±175°)
Oscillating Speed

IPX3:4s /cycle(2×120°);

IPX4:12s /cycle(2×350°);

Water Flow1-10L/min adjustable
 
General
Control & OperationPLC and touch screen intelligent control system
TurntableDiameter: Φ600mm, can be tilted 15°, rotating speed 1r/min, with lifting support frame, bearing capacity ≤50kg
Test Duration0-99.9min, can be preset
Pressure Gauge0~0.25MPa
Water Storage SystemThe control box and water storage tank are built in one cabinet, the water storage tank is equipped with a water level float valve to automatically control the water inlet, and has high and low water level alarm detection, to effectively prevent the pump from being damaged due to dry water.
OptionalThe hand-held spray nozzle as per IEC 60529 figure 5 can be configured
Safety ProtectionPhase sequence protection, leakage protection, water shortage protection, abnormal protection
 

Hot Products

IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment Complied Standards & ...
IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment ...
IEC 60390 Electric Vehicle Charging Plug And Socket Cable Flexing Test Apparatus Complied Standards ...
IEC62196 Electric Vehicle Plugs And Connectors Steel Ball Impact Device Complied Standards & Clauses ...
IEC 62196 Electric Vehicle Connector And Plug Universal Material Tensile Machine Complied Standards ...
IEC62196 New Energy Vehicle Multiple Portable Socket-Outlets Mechanical Strength Tester Complied ...