Home Companies Sinuo Testing Equipment Co. , Limited

UL1598 Water Spray Test Equipment

Sinuo Testing Equipment Co. , Limited

Contact Us

[China] country

Trade Verify

Address: Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China

Contact name:Zoe Zou

Inquir Now

Sinuo Testing Equipment Co. , Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

UL1598 Water Spray Test Equipment

Country/Region china
City & Province guangzhou guangdong
Categories Instrument Parts & Accessories
InquireNow

Product Details

 

 

UL Water Spray Test Apparatus

 

Complied Standards & Clauses


UL 1993 “Self-Ballasted Lamps and Lamp Adapters” clause 24, figure 24.1 and 24.2

UL 60507-ENGL 1999 figure 38.1 and 38.2

ANSI Z21.10.3-2004

ANSI Z21.58 Figure 10/Figure 11

CSA4.3-2004

UL1598, UL153, UL154B, UL1703, UL8750, UL1741, UL514B, UL1278, UL1571, etc.

 

Equipment Overview


Use Environment:

Use place: there should be equipped with lighting and waterproof leakage switch (or socket), the ground needs to be flat, and the water intake and drainage function should be good.

Water source: clean water or tap water without impurities, equipped with water cleaning filter.

 

Samples and Restrictions: Self-ballasted lamps and lamp adapters

 

Structure: The device consists of a 3 UL spray heads, 3 pressure gauges, 3 control valves and a water supply pipe rack.

 

Application: 

To verify the protective performance of the enclosure for self-ballasted lamps and lamp adapters under UL water spray environment.

 

Principle: Applying spray test to test sample by controlling the water supply pressure and the distance between the nozzle and sample.

 

Technical Parameters


Control & OperationManual
Spray Heads3 pieces (or 4 pieces optional, with one lower nozzle), manufactured according to UL 60507-ENGL 1999 figure 38.1 and 38.2, UL 1993 figure 24.1,etc.
Spray Heads PositionsThe positions of spray heads can be adjusted up or down through the water spray pipe rack, the spacing is made according to UL 60507-ENGL 1999 figure 38.1 and 38.2, UL 1993 figure 24.1,etc.
Lower Nozzle Angle (Optional)45° up
Water PressureAt each head at approximately 34.5Kpa (5 psi), each spray head has a corresponding press gauge, total water flow pressure is 50-150Kpa
Distance between the center Nozzle and the DeviceApproximately 1.4m (55 inches)
Spray Head Pipe RackMaterial: high-grade aluminum profile with casters
 
Details:

Hot Products

IEC 62196-1 Electric Vehicle Charging Interface Mechanical Load Test Device Complied Standards & ...
IEC62196 Electric Vehicle Charging Plug and Socket Withdrawal Insertion Force Test Equipment ...
IEC 60390 Electric Vehicle Charging Plug And Socket Cable Flexing Test Apparatus Complied Standards ...
IEC62196 Electric Vehicle Power Supply Plugs And Sockets Rolling Test Equipment Complied Standards & ...
IEC62196 Electric Vehicle Plugs And Connectors Steel Ball Impact Device Complied Standards & Clauses ...
IEC 62196 Electric Vehicle Connector And Plug Universal Material Tensile Machine Complied Standards ...